Continuous EM and ULS thickness profiling in support of ice force measurements


Contact
chaas [ at ] awi-bremerhaven.de

Abstract

Coincident, continuous ice force and thickness measurements are presented which have been performed in 2002 on a lighthouse located in drifting sea ice in the Bay of Bothnia near Luleå, Sweden. Level and ridged ice thickness has been profiled both by means of upward-looking sonars (ULS) and electromagnetic induction (EM) sounding. Preliminary results indicate some correlation between forces and overall ice thicknesses, although no careful analysis considering varying ridge properties and different failure modes has been carried out yet. Both, EM and ULS data were well capable of yielding the required ice thickness data, although they have to be interpreted differently. However, EM measurements underestimated the maximum depth of ridge keels by as much as 50%. This might be due to disadvantageous sea water properties in the Bay of Bothnia.



Item Type
Conference (Conference paper)
Authors
Divisions
Programs
Publication Status
Published
Event Details
Loeset, S., Bonnemaire, B., Bjerkas, M. (Eds.), Proceedings of the 17th International Conference on Port and Ocean Engineering under Arctic Conditions, POAC ´03, Trondheim, Norway. Department of Civil and Transport Engineering, Norwegian University of Sci.
Eprint ID
9105
Cite as
Haas, C. and Jochmann, P. (2003): Continuous EM and ULS thickness profiling in support of ice force measurements , Loeset, S., Bonnemaire, B., Bjerkas, M. (Eds.), Proceedings of the 17th International Conference on Port and Ocean Engineering under Arctic Conditions, POAC ´03, Trondheim, Norway. Department of Civil and Transport Engineering, Norwegian University of Sci .


Download
[thumbnail of Fulltext]
Preview
PDF (Fulltext)
Haa2003c.pdf

Download (263kB) | Preview
Cite this document as:

Share
Add to AnyAdd to TwitterAdd to FacebookAdd to LinkedinAdd to PinterestAdd to Email

Research Platforms
N/A

Campaigns
N/A


Actions
Edit Item Edit Item