WEKO3
アイテム
{"_buckets": {"deposit": "25e50b2e-5b0f-454f-8c55-97fc81498d12"}, "_deposit": {"created_by": 18, "id": "5616", "owners": [18], "pid": {"revision_id": 0, "type": "depid", "value": "5616"}, "status": "published"}, "_oai": {"id": "oai:kyutech.repo.nii.ac.jp:00005616", "sets": ["7"]}, "author_link": [], "item_20_date_granted_61": {"attribute_name": "学位授与年月日", "attribute_value_mlt": [{"subitem_dategranted": "2018-03-23"}]}, "item_20_degree_grantor_59": {"attribute_name": "学位授与機関", "attribute_value_mlt": [{"subitem_degreegrantor": [{"subitem_degreegrantor_name": "九州工業大学"}], "subitem_degreegrantor_identifier": [{"subitem_degreegrantor_identifier_name": "17104", "subitem_degreegrantor_identifier_scheme": "kakenhi"}]}]}, "item_20_degree_name_58": {"attribute_name": "学位名", "attribute_value_mlt": [{"subitem_degreename": "博士(工学)"}]}, "item_20_description_30": {"attribute_name": "目次", "attribute_value_mlt": [{"subitem_description": "1 Introduction||2 Previous Researches||3 Angle Estimation of Extension Phase||4 Estimation of Initial Lower Limb Angle||5 Conclusion and Future Work", "subitem_description_type": "TableOfContents"}]}, "item_20_description_4": {"attribute_name": "抄録", "attribute_value_mlt": [{"subitem_description": "Standing-up motion from a chair is directly connected with walking and which is frequently performed every day. It is difficult for some elders because of the weakened function of muscles or motor. The training of standing-up motion and assisting the elderly with the standing-up motion from a chair is important to the elderly Quality of Life (QOL). Analysis of the posture parameters during standing up motion is useful for the physical therapists and care-giver in rehabilitation training or movement assist. The motion capture system can measure the movement of body posture in any direction precisely. However, it is difficult to use in daily life because of high cost and specific requirements for the space. And the use of motion capture system will give unpleasant feeling to users because many reflective makers are attached in the body. The purpose of this study is to develop a new estimation system, which can be used in daily life for angle estimation of extension phase during standing-up motion. This paper discusses the estimation system consist of: 1) the estimation of body joint angles and COG during extension phase; 2) the improvement of the proposed system for angle estimation. In 1), an estimation model was proposed that was able to estimate knee and ankle joint angles by combining angle and acceleration of trunk, which came from the inertial sensor attached to the chest of users during the extension phase. The estimate result of joint angle shows higher accuracy than previous research. In 2), in order to expand the use of proposed system and improve the estimation accuracy of proposed system, we estimated the initial angle of knee and ankle by combining foot pressure which measured by a force sensor plate before standing-up motion. The estimation model of initial lower limb angle shows high accuracy. It can be used for angle estimation of extension phase even though the initial knee and ankle joint angle were unknown.", "subitem_description_language": "en", "subitem_description_type": "Abstract"}]}, "item_20_description_5": {"attribute_name": "備考", "attribute_value_mlt": [{"subitem_description": "九州工業大学博士学位論文 学位記番号:生工博甲第317号 学位授与年月日:平成30年3月23日", "subitem_description_type": "Other"}]}, "item_20_description_60": {"attribute_name": "学位授与年度", "attribute_value_mlt": [{"subitem_description": "平成29年度", "subitem_description_type": "Other"}]}, "item_20_dissertation_number_62": {"attribute_name": "学位授与番号", "attribute_value_mlt": [{"subitem_dissertationnumber": "甲第317号"}]}, "item_20_identifier_registration": {"attribute_name": "ID登録", "attribute_value_mlt": [{"subitem_identifier_reg_text": "10.18997/00006827", "subitem_identifier_reg_type": "JaLC"}]}, "item_20_text_34": {"attribute_name": "アドバイザー", "attribute_value_mlt": [{"subitem_text_value": "和田, 親宗"}]}, "item_20_version_type_63": {"attribute_name": "出版タイプ", "attribute_value_mlt": [{"subitem_version_resource": "http://purl.org/coar/version/c_970fb48d4fbd8a85", "subitem_version_type": "VoR"}]}, "item_access_right": {"attribute_name": "アクセス権", "attribute_value_mlt": [{"subitem_access_right": "open access", "subitem_access_right_uri": "http://purl.org/coar/access_right/c_abf2"}]}, "item_creator": {"attribute_name": "著者", "attribute_type": "creator", "attribute_value_mlt": [{"creatorNames": [{"creatorName": "Jin, Fang", "creatorNameLang": "en"}, {"creatorName": "金, 芳", "creatorNameLang": "ja"}]}]}, "item_files": {"attribute_name": "ファイル情報", "attribute_type": "file", "attribute_value_mlt": [{"accessrole": "open_date", "date": [{"dateType": "Available", "dateValue": "2018-06-13"}], "displaytype": "detail", "download_preview_message": "", "file_order": 0, "filename": "sei_k_317.pdf", "filesize": [{"value": "1.8 MB"}], "format": "application/pdf", "future_date_message": "", "is_thumbnail": false, "licensetype": "license_note", "mimetype": "application/pdf", "size": 1800000.0, "url": {"label": "sei_k_317.pdf", "objectType": "fulltext", "url": "https://kyutech.repo.nii.ac.jp/record/5616/files/sei_k_317.pdf"}, "version_id": "a1bf3351-0312-4a8f-929f-6abc19eb48f1"}]}, "item_keyword": {"attribute_name": "キーワード", "attribute_value_mlt": [{"subitem_subject": "Standing-up motion", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Joint angle", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Inertial sensor", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Force sensor", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Elderly", "subitem_subject_scheme": "Other"}]}, "item_language": {"attribute_name": "言語", "attribute_value_mlt": [{"subitem_language": "eng"}]}, "item_resource_type": {"attribute_name": "資源タイプ", "attribute_value_mlt": [{"resourcetype": "doctoral thesis", "resourceuri": "http://purl.org/coar/resource_type/c_db06"}]}, "item_title": "Research on Joint Angle Estimation for Standing-up Motion by Using a Measurement System Consist of Inertial Sensor and Force Sensor Plate", "item_titles": {"attribute_name": "タイトル", "attribute_value_mlt": [{"subitem_title": "Research on Joint Angle Estimation for Standing-up Motion by Using a Measurement System Consist of Inertial Sensor and Force Sensor Plate", "subitem_title_language": "en"}, {"subitem_title": "慣性センサおよび力センサを用いた立ち上がり時の関節角度推定手法に関する研究", "subitem_title_language": "ja"}]}, "item_type_id": "20", "owner": "18", "path": ["7"], "permalink_uri": "https://doi.org/10.18997/00006827", "pubdate": {"attribute_name": "PubDate", "attribute_value": "2018-06-13"}, "publish_date": "2018-06-13", "publish_status": "0", "recid": "5616", "relation": {}, "relation_version_is_last": true, "title": ["Research on Joint Angle Estimation for Standing-up Motion by Using a Measurement System Consist of Inertial Sensor and Force Sensor Plate"], "weko_shared_id": -1}
慣性センサおよび力センサを用いた立ち上がり時の関節角度推定手法に関する研究
https://doi.org/10.18997/00006827
https://doi.org/10.18997/0000682720d1e19a-0fab-4036-948f-654a2f3f2daa
名前 / ファイル | ライセンス | アクション |
---|---|---|
sei_k_317.pdf (1.8 MB)
|
|
Item type | 学位論文 = Thesis or Dissertation(1) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
公開日 | 2018-06-13 | |||||||||
資源タイプ | ||||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_db06 | |||||||||
資源タイプ | doctoral thesis | |||||||||
タイトル | ||||||||||
言語 | en | |||||||||
タイトル | Research on Joint Angle Estimation for Standing-up Motion by Using a Measurement System Consist of Inertial Sensor and Force Sensor Plate | |||||||||
タイトル | ||||||||||
言語 | ja | |||||||||
タイトル | 慣性センサおよび力センサを用いた立ち上がり時の関節角度推定手法に関する研究 | |||||||||
言語 | ||||||||||
言語 | eng | |||||||||
著者 |
金, 芳
× 金, 芳
|
|||||||||
抄録 | ||||||||||
内容記述タイプ | Abstract | |||||||||
内容記述 | Standing-up motion from a chair is directly connected with walking and which is frequently performed every day. It is difficult for some elders because of the weakened function of muscles or motor. The training of standing-up motion and assisting the elderly with the standing-up motion from a chair is important to the elderly Quality of Life (QOL). Analysis of the posture parameters during standing up motion is useful for the physical therapists and care-giver in rehabilitation training or movement assist. The motion capture system can measure the movement of body posture in any direction precisely. However, it is difficult to use in daily life because of high cost and specific requirements for the space. And the use of motion capture system will give unpleasant feeling to users because many reflective makers are attached in the body. The purpose of this study is to develop a new estimation system, which can be used in daily life for angle estimation of extension phase during standing-up motion. This paper discusses the estimation system consist of: 1) the estimation of body joint angles and COG during extension phase; 2) the improvement of the proposed system for angle estimation. In 1), an estimation model was proposed that was able to estimate knee and ankle joint angles by combining angle and acceleration of trunk, which came from the inertial sensor attached to the chest of users during the extension phase. The estimate result of joint angle shows higher accuracy than previous research. In 2), in order to expand the use of proposed system and improve the estimation accuracy of proposed system, we estimated the initial angle of knee and ankle by combining foot pressure which measured by a force sensor plate before standing-up motion. The estimation model of initial lower limb angle shows high accuracy. It can be used for angle estimation of extension phase even though the initial knee and ankle joint angle were unknown. | |||||||||
言語 | en | |||||||||
目次 | ||||||||||
内容記述タイプ | TableOfContents | |||||||||
内容記述 | 1 Introduction||2 Previous Researches||3 Angle Estimation of Extension Phase||4 Estimation of Initial Lower Limb Angle||5 Conclusion and Future Work | |||||||||
備考 | ||||||||||
内容記述タイプ | Other | |||||||||
内容記述 | 九州工業大学博士学位論文 学位記番号:生工博甲第317号 学位授与年月日:平成30年3月23日 | |||||||||
キーワード | ||||||||||
主題Scheme | Other | |||||||||
主題 | Standing-up motion | |||||||||
キーワード | ||||||||||
主題Scheme | Other | |||||||||
主題 | Joint angle | |||||||||
キーワード | ||||||||||
主題Scheme | Other | |||||||||
主題 | Inertial sensor | |||||||||
キーワード | ||||||||||
主題Scheme | Other | |||||||||
主題 | Force sensor | |||||||||
キーワード | ||||||||||
主題Scheme | Other | |||||||||
主題 | Elderly | |||||||||
アドバイザー | ||||||||||
和田, 親宗 | ||||||||||
学位授与番号 | ||||||||||
学位授与番号 | 甲第317号 | |||||||||
学位名 | ||||||||||
学位名 | 博士(工学) | |||||||||
学位授与年月日 | ||||||||||
学位授与年月日 | 2018-03-23 | |||||||||
学位授与機関 | ||||||||||
学位授与機関識別子Scheme | kakenhi | |||||||||
学位授与機関識別子 | 17104 | |||||||||
学位授与機関名 | 九州工業大学 | |||||||||
学位授与年度 | ||||||||||
内容記述タイプ | Other | |||||||||
内容記述 | 平成29年度 | |||||||||
出版タイプ | ||||||||||
出版タイプ | VoR | |||||||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||||
アクセス権 | ||||||||||
アクセス権 | open access | |||||||||
アクセス権URI | http://purl.org/coar/access_right/c_abf2 | |||||||||
ID登録 | ||||||||||
ID登録 | 10.18997/00006827 | |||||||||
ID登録タイプ | JaLC |