Method of measuring the water jet diameter : Método de medida del chorro de agua
Identificadores
URI: http://hdl.handle.net/10317/3483Compartir
Métricas
Estadísticas
Ver Estadísticas de usoMetadatos
Mostrar el registro completo del ítemAutor
Gil Cano, JesúsDirector/a
Ros Mcdonnell, Lorenzo BrianEscuela/Centro
Escuela Técnica Superior de Ingeniería IndustrialUniversidad
Universidad Politécnica de CartagenaDepartamento
Economía de la EmpresaÁrea de conocimiento
Organización de EmpresasFecha de publicación
2013-10-16Palabras clave
Abrasive water jetManufacturing technologies
Chorro de agua
Método de medida
Resumen
Abrasive Water Jet (AWJ) machining is one of the manufacturing technologies with highest market growth. It is a process in which material is removed from a work piece using mineral abrasive particles. Due to this principle, AWJ machining technology produces significant amount of waste products that consists mainly on the mineral abrasive. It is possible to cut softer materials with pure water jet (WJ), but efficiency is then reduced. In order to increase the efficiency of the WJ machining and to make the process more sustainable than AWJ, the Ice Jet (IJ) technology was developed. The IJ technology aims to supplement the currently used AWJ technology in several applications. Unfortunately addition of liquid nitrogen to a high-speed water jet can cause dispersion of the jet and consequently reduction of cutting efficiency.
Previous experiments in the field of jet diameter measurement have been done by different research groups. In this thesis these methods and the results from the studies ...
Colecciones
El ítem tiene asociados los siguientes ficheros de licencia:
Redes sociales