Thresholds for tracing ships' ballast water: An Australian case study

Publication Type:
Journal Article
Citation:
Marine Ecology Progress Series, 2010, 408 pp. 19 - 32
Issue Date:
2010-06-03
Full metadata record
To limit the spread of non-indigenous marine species, ships can be legally required to conduct ballast water exchange (BWE) prior to discharging ballast water. It has been proposed to verify BWE by measuring concentrations of coastal tracers in ballast tanks, which should track their removal. Using 3 Australian ports as case studies (Port Botany, Port Curtis and Port Phillip Bay), each representing a different BWE verification difficulty level, the spatial and temporal variability of chromophoric dissolved organic matter (CDOM) and 3 trace elements (manganese [Mn], barium [Ba] and phosphorus [P]), were measured to assess their utility as tracers of coastal (unexchanged) ballast water. CDOM fluorescence at λex/λem = 320/414 nm (C2*) and 370/494 nm (C3*) and Mn concentrations were significantly higher in ports than in the adjacent Tasman Sea, except near port entrances and at a few sites in Port Botany. Ba concentrations demonstrated the least power to discriminate coastal sources, but P easily discriminated water from mesotrophic Port Phillip Bay. In general, tracers showed greater variation between and within ports, rather than between seasons. Conservative BWE thresholds were calculated to be 1.6 quinine sulphate equivalents for C2*, 0.9 quinine sulphate equivalents for C3*, 1.4 μg l-1 for Mn and 6.9 μg l -1 for Ba. Overall, these thresholds would allow water sourced from eastern Australian ports to be identified as coastal at 92%, 69% and 74% of sites examined using C3*, Mn and Ba, respectively, requiring 71 ± 26%, 54 ± 40% and 59 ± 38% replacement with mid-ocean water to be within ocean baseline concentration ranges. © Inter-Research 2010 · www.int-res.com.
Please use this identifier to cite or link to this item: