Robust design optimization of PM-SMC motors for six sigma quality manufacturing

Lei, G; Zhu, JG; Guo, YG; Hu, JF; Xu, W; Shao, KR

Robust design optimization of PM-SMC motors for six sigma quality manufacturing

Lei, G

Zhu, JG

Guo, YG

Hu, JF

Xu, W

Shao, KR

Permalink

Publication Type:: Journal Article
Citation:: IEEE Transactions on Magnetics, 2013, 49 (7), pp. 3953 - 3956
Issue Date:: 2013-08-02

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download Accepted ManuscriptAdobe PDF (461.88 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Lei, G https://orcid.org/0000-0002-8369-6802	en_US
dc.contributor.author	Zhu, JG https://orcid.org/0000-0002-9763-4047	en_US
dc.contributor.author	Guo, YG https://orcid.org/0000-0001-6182-0684	en_US
dc.contributor.author	Hu, JF https://orcid.org/0000-0001-6725-4564	en_US
dc.contributor.author	Xu, W https://orcid.org/0000-0003-0816-6016	en_US
dc.contributor.author	Shao, KR	en_US
dc.date.issued	2013-08-02	en_US
dc.identifier.citation	IEEE Transactions on Magnetics, 2013, 49 (7), pp. 3953 - 3956	en_US
dc.identifier.issn	0018-9464	en_US
dc.identifier.uri	http://hdl.handle.net/10453/27245
dc.description.abstract	In our previous work, soft magnetic composite (SMC) material was employed to design cores for two kinds of permanent magnet (PM) motors, namely transverse flux machine (TFM) and claw pole motor. Compared with motors designed by traditional silicon steel sheets, these motors require 3D flux design with new material and new manufacturing method. Meanwhile, the performances of these motors highly depend on the material and manufacturing parameters besides structure parameters. Therefore, we present a robust design optimization method for high quality manufacturing of these PM-SMC motors to improve their industrial applications. Thereafter, from the design analysis of a PM-SMC TFM, it can be found that the proposed method can significantly improve the manufacturing quality and reliability of the motor, and reduce the manufacturing cost. © 1965-2012 IEEE.	en_US
dc.relation.ispartof	IEEE Transactions on Magnetics	en_US
dc.relation.isbasedon	10.1109/TMAG.2013.2243123	en_US
dc.subject.classification	Applied Physics	en_US
dc.title	Robust design optimization of PM-SMC motors for six sigma quality manufacturing	en_US
dc.type	Journal Article
utslib.citation.volume	7	en_US
utslib.citation.volume	49	en_US
utslib.for	0912 Materials Engineering	en_US
utslib.for	0913 Mechanical Engineering	en_US
utslib.for	02 Physical Sciences	en_US
utslib.for	09 Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Electrical and Data Engineering
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Mechanical and Mechatronic Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CCET - Centre for Clean Energy Technology
utslib.copyright.status	open_access
pubs.issue	7	en_US
pubs.publication-status	Published	en_US
pubs.volume	49	en_US

Abstract:

In our previous work, soft magnetic composite (SMC) material was employed to design cores for two kinds of permanent magnet (PM) motors, namely transverse flux machine (TFM) and claw pole motor. Compared with motors designed by traditional silicon steel sheets, these motors require 3D flux design with new material and new manufacturing method. Meanwhile, the performances of these motors highly depend on the material and manufacturing parameters besides structure parameters. Therefore, we present a robust design optimization method for high quality manufacturing of these PM-SMC motors to improve their industrial applications. Thereafter, from the design analysis of a PM-SMC TFM, it can be found that the proposed method can significantly improve the manufacturing quality and reliability of the motor, and reduce the manufacturing cost. © 1965-2012 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/27245