Miniaturized E-shaped PIFA antenna for wideband implantable biomedical applications

Gozasht, F; Hossain, MD; Mohan, AS

Miniaturized E-shaped PIFA antenna for wideband implantable biomedical applications

Gozasht, F

Hossain, MD

Mohan, AS

Permalink

Publication Type:: Conference Proceeding
Citation:: Proceedings of the 2013 International Conference on Electromagnetics in Advanced Applications, ICEAA 2013, 2013, pp. 832 - 835
Issue Date:: 2013-12-02

Open Access

Copyright Clearance Process

Recently Added
In Progress
Open Access

This item is open access.

Adobe PDF

Download full textAdobe PDF (943.83 kB)

Adobe PDF

Download Published versionAdobe PDF (892.08 kB)

View on publisher's site

View statistics

Full metadata record

Field	Value	Language
dc.contributor.author	Gozasht, F https://orcid.org/0000-0003-4718-2940	en_US
dc.contributor.author	Hossain, MD https://orcid.org/0000-0002-8162-686X	en_US
dc.contributor.author	Mohan, AS https://orcid.org/0000-0002-4503-5851	en_US
dc.date.issued	2013-12-02	en_US
dc.identifier.citation	Proceedings of the 2013 International Conference on Electromagnetics in Advanced Applications, ICEAA 2013, 2013, pp. 832 - 835	en_US
dc.identifier.isbn	9781467357074	en_US
dc.identifier.uri	http://hdl.handle.net/10453/120778
dc.description.abstract	This paper presents an implantable miniaturised printed E-shaped PIFA antenna for biomedical applications at 2.4 GHz. The design and measured results for the proposed antenna suitable for implanting either in the arm or under the chest are presented. Simulations are conducted using both homogeneous and inhomogeneous phantoms to help to design the proposed antenna. The measured results are obtained by immersing a prototype of the proposed antenna in a phantom that consists of meat-mixture. The antenna is fed by a coaxial probe and optimizes the placement of shorting pin to obtain superior performance. The antenna occupies a volume less than 1cm3 without the biocompatible insulation and its size reduction is about 60% compared to the standard E-shaped patch antenna reported in the literature. © 2013 IEEE.	en_US
dc.relation	http://purl.org/au-research/grants/arc/DP0773234
dc.relation.ispartof	Proceedings of the 2013 International Conference on Electromagnetics in Advanced Applications, ICEAA 2013	en_US
dc.relation.isbasedon	10.1109/ICEAA.2013.6632355	en_US
dc.title	Miniaturized E-shaped PIFA antenna for wideband implantable biomedical applications	en_US
dc.type	Conference Proceeding
utslib.for	0903 Biomedical Engineering	en_US
pubs.embargo.period	Not known	en_US
pubs.organisational-group	/University of Technology Sydney
pubs.organisational-group	/University of Technology Sydney/DVC (Teaching and Learning)
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology
pubs.organisational-group	/University of Technology Sydney/Faculty of Engineering and Information Technology/School of Biomedical Engineering
pubs.organisational-group	/University of Technology Sydney/Strength - CHT - Health Technologies
utslib.copyright.status	open_access
pubs.publication-status	Published	en_US

Abstract:

This paper presents an implantable miniaturised printed E-shaped PIFA antenna for biomedical applications at 2.4 GHz. The design and measured results for the proposed antenna suitable for implanting either in the arm or under the chest are presented. Simulations are conducted using both homogeneous and inhomogeneous phantoms to help to design the proposed antenna. The measured results are obtained by immersing a prototype of the proposed antenna in a phantom that consists of meat-mixture. The antenna is fed by a coaxial probe and optimizes the placement of shorting pin to obtain superior performance. The antenna occupies a volume less than 1cm3 without the biocompatible insulation and its size reduction is about 60% compared to the standard E-shaped patch antenna reported in the literature. © 2013 IEEE.

Please use this identifier to cite or link to this item:

http://hdl.handle.net/10453/33209