Strukturní charakteristiky laserových svarů ocelí
Structure parameters of laser welded steel plates
Typ dokumentu
diplomová prácemaster thesis
Autor
Aleš Vlk
Vedoucí práce
Trojan Karel
Oponent práce
Drahokoupil Jan
Studijní obor
Inženýrství pevných látekStudijní program
Aplikace přírodních vědInstituce přidělující hodnost
katedra inženýrství pevných látekPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Diplomová práce je zaměřena na charakterizaci zbytkového stavu napjatosti v laserem svařených ocelových deskách vyhotovených z oceli P355NL1. V úvodu této práce je čtenář stručně seznámen s pojmem zbytkových napětí, jejich klasifikací \linebreak a příčinami vzniku, základy rentgenové a neutronové difrakce a problematikou laserového svařování. V experimentální části jsou provedena měření na nesvařených deskách sloužící k charakterizaci výchozího materiálu. Poté je porovnán povrchový stav zbytkové napjatosti napříč svarem žíhaných a nežíhaných desek. Toto srovnání nám dává náhled na vliv stavu zbytkové napjatosti vzniklý při výrobě na nově formovaný samotný svar. Pro žíhané desky byl dále studován zbytkový stav napjatosti objemového materiálu za použití neutronové difrakce. The aim of this thesis is a characterization of residual stress state of laser welded P355NL1 steel plates. Theoretical part of this work contains a brief introduction in to the problematics of residual stress generation, basics of X-ray and neutron diffraction and laser welding. In the experimental part of this work, the measurements characterizing the samples before welding are performed. After the welding, a comparison of a surface residual stress state of annealed and non-annealed plates is performed, giving us information about the effect of the residual stress state present in the material before welding on the weld itself. For the annealed plates, the residual stress state of the bulk material is further studied using neutron diffraction.