Please use this identifier to cite or link to this item: http://hdl.handle.net/10773/20307
Title: Nitrogen-modified nano-titania: True phase composition, microstructure and visible-light induced photocatalytic NOx abatement
Author: Tobaldi, D. M.
Pullar, R. C.
Gualtieri, A. F.
Otero-Irurueta, G.
Singh, M. K.
Seabra, M. P.
Labrincha, J. A.
Keywords: ANATASE-RUTILE TRANSFORMATION
TIO2 THIN-FILMS
OPTICAL-PROPERTIES
NANOCRYSTALLINE TIO2
AIR-POLLUTION
PARTICLE-SIZE
SURFACE
DIOXIDE
POWDER
OXIDES
Issue Date: 2015
Publisher: ACADEMIC PRESS INC ELSEVIER SCIENCE
Abstract: Titanium dioxide (TiO2) is a popular photocatalyst used for many environmental and anti-pollution applications, but it normally operates under UV light, exploiting similar to 5% of the solar spectrum. Nitrification of titania to form N-doped TiO2 has been explored as a way to increase its photocatalytic activity under visible light, and anionic doping is a promising method to enable TiO2 to harvest visible-light by changing its photo-absorption properties. In this paper, we explore the insertion of nitrogen into the TiO2 lattice using our green sol gel nanosynthesis method, used to create 10 nm TiO2 NPs. Two parallel routes were studied to produce nitrogen-modified TiO2 nanoparticles (NPs), using HNO3+NH3 (acid-precipitated base-peptised) and NH4OH (totally base catalysed) as nitrogen sources. These NPs were thermally treated between 450 and 800 degrees C. Their true phase composition (crystalline and amorphous phases), as well as their micro-/nanostructure (crystalline domain shape, size and size distribution, edge and screw dislocation density) was fully characterised through advanced X-ray methods (Rietveld-reference intensity ratio, RIR, and whole powder pattern modelling, WPPM). As pollutants, nitrogen oxides (NO) are of particular concern for human health, so the photocatalytic activity of the NPs was assessed by monitoring NO, abatement, using both solar and white-light (indoor artificial lighting), simulating outdoor and indoor environments, respectively. Results showed that the onset of the anatase-to-rutile phase transformation (ART) occurred at temperatures above 450 degrees C, and NPs heated to 450 degrees C possessed excellent photocatalytic activity (PCA) under visible white-light (indoor artificial lighting), with a PCA double than that of the standard P25 TiO2 NPs. However, higher thermal treatment temperatures were found to be detrimental for visible-light photocatalytic activity, due to the effects of four simultaneous occurrences: (i) loss of OH groups and water adsorbed on the photocatalyst surface; (ii) growth of crystalline domain sizes with decrease in specific surface area; (iii) onset and progress of the ART; (iv) the increasing instability of the nitrogen in the titania lattice. (C) 2015 Elsevier Inc. All rights reserved.
Peer review: yes
URI: http://hdl.handle.net/10773/20307
DOI: 10.1016/j.jssc.2015.08.008
ISSN: 0022-4596
Publisher Version: 10.1016/j.jssc.2015.08.008
Appears in Collections:CICECO - Artigos



FacebookTwitterLinkedIn
Formato BibTex MendeleyEndnote Degois 

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.