Influence of exit nozzle diameter and channel profile of plasma torch on parameters of boundary instability

0348261 - ÚFP 2011 RIV CZ eng O - Ostatní výsledky
Kopecký, Vladimír - Kavka, Tetyana
Influence of exit nozzle diameter and channel profile of plasma torch on parameters of boundary instability.
2010
Grant CEP: GA ČR GA202/08/1084
Výzkumný záměr: CEZ:AV0Z20430508
Klíčová slova: plasma toech * boundary instability * plasma velocity * exit nozzle * channel profile
Kód oboru RIV: BL - Fyzika plazmatu a výboje v plynech
http://sppt.aldebaran.cz/

Předneseno na konf.:Symposium on plasma physics and technology/24th./. 14.06.2010-17.06.2010,Praha,Measurements of oscillation parameters are possible to use as a sensible method for determination of relative changes of the exit plasma velocity. This method has been used for testing of construction parameters of the hybrid argon-water torch WSP®H2000. Oscillations in the generated jet were observed using a linear array of eight photo-diodes positioned parallel to the axial axis of the jet image. The influence of a construction changes on the plasma velocity was studied by changing the exit nozzle diameter, the diameter of the arc channel and the argon flow rate. It appeared that decreased channel diameter in the cathode part of the torch resulted in higher the plasma velocity. Increase of the channel diameter near the torch nozzle resulted in plasma velocity reduction.
Trvalý link: http://hdl.handle.net/11104/0188836