Abrasive Waterjet (AWJ) Titanium Tangental Turning Evaluation

0428233 - ÚGN 2015 RIV HR eng J - Článek v odborném periodiku
Hloch, Sergej - Hlaváček, Petr - Vasilko, K. - Cárach, J. - Samardžič, I. - Kozak, D. - Ščučka, Jiří - Klich, Jiří - Klichová, Dagmar
Abrasive Waterjet (AWJ) Titanium Tangental Turning Evaluation.
Metalurgija. Roč. 53, č. 4 (2014), s. 537-540. ISSN 0543-5846
Grant CEP: GA MŠMT ED2.1.00/03.0082
Institucionální podpora: RVO:68145535
Klíčová slova: titanium * abrasive waterjet turning * traverse speed
Kód oboru RIV: JQ - Strojní zařízení a nástroje
Impakt faktor: 0.959, rok: 2014
http://public.carnet.hr/metalurg/Metalurgija/2014_vol_53/No_4/MET_53_4_537-540_Hloch.pdf

The paper deals with abrasive waterjet titanium tangential turning. Titanium grade 3 with a diameter of 55 mm was used as an experimental material. Technological conditions of turning tests were the same by gradually changing value of traverse speed (vf = 1,5; 3; 4,5; 6; 7,5 mm·min-1). Experiment tests were performed by using continuous abrasive waterjet of pressure p = 400MPa, by rotation n = 60 rpm of workpiece. The abrasive particles (Barton Garnet) were fed to the waterjet in the amount of 0,4 kg·min-1. It was determined that acceleration of traverse speed did not increase the surface profile parameters.
Trvalý link: http://hdl.handle.net/11104/0233625