Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications

0464594 - ÚFM 2017 RIV RU eng J - Článek v odborném periodiku
Betekhtin, V. I. - Kolobov, Yu. R. - Golosova, O. A. - Dvořák, Jiří - Sklenička, Václav - Kardashev, B. K. - Kadomtsev, A. G. - Narykova, M. V. - Ivanov, M. B.
Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications.
Reviews on Advanced Materials Science. Roč. 45, 1-2 (2016), s. 42-51. ISSN 1606-5131. E-ISSN 1605-8127
Institucionální podpora: RVO:68081723
Klíčová slova: Creep * Elastic moduli * Plastic flow * Beta-type titanium alloys * Biomedical applications
Kód oboru RIV: JG - Hutnictví, kovové materiály
Impakt faktor: 2.500, rok: 2016

This research was focused on a new low-modulus β-type titanium alloy Ti-26Nb-7Mo-12Zr (wt.%). The microstructure effects on elastic modulus (measured by the acoustic resonance method) as well as microplastic, mechanical, tribological, and corrosive properties of Ti-26Nb-7Mo-12Zr alloy after thermomechanical processing were examined. The microstructure was characterized in detail by scanning electron microscopy and electron backscatter diffraction methods. The experimental research results have shown that formation of the fully recrystallized structure in the titanium alloy leads to an increase in elastic modulus, microplastic flow stress and plasticity, as compared to the corresponding characteristics of the alloy having partially recrystallized and coarse-grained structures. The durability of β titanium alloy was examined and compared with that of commercially pure α titanium (CP Ti). It was found that, in the same creep loading conditions, the low-modulus Ti-26Nb-7Mo-12Zr alloy exhibits a longer time to creep fracture, as compared to the pure α titanium.
Trvalý link: http://hdl.handle.net/11104/0263442