Počet záznamů: 1  

Optical properties of Na2O-TiO2-SiO2 glass films prepared by the sol-gel method

  1. 1.
    0485711 - ÚFE 2018 RIV US eng C - Konferenční příspěvek (zahraniční konf.)
    Bartoň, Ivo - Matějec, Vlastimil - Mrázek, Jan - Predoana, L. - Zaharescu, M.
    Optical properties of Na2O-TiO2-SiO2 glass films prepared by the sol-gel method.
    Proceedings of SPIE - The International Society for Optical Engineering 2017. Vol. 10603. Bellingham: SPIE: The Society of Photo-Optical Instrumentation Engineers, 2017 - (Fliegel, K.; Páta, P.), č. článku 106030R. SPIE. ISBN 978-1-5106-1702-5. ISSN 0277-786X.
    [Photonics, Devices, and Systems VII 2017. Prague (CZ), 28.08.2017-30.08.2017]
    Grant CEP: GA ČR GA16-10019S
    Grant ostatní: AV ČR(CZ) AR-17-03
    Program: Bilaterální spolupráce
    Institucionální podpora: RVO:67985882
    Klíčová slova: sol-gel method * transmission spectra * glass slide
    Obor OECD: Ceramics

    Layers based on TiO2-SiO2 systems fabricated by sol-gel method have been investigated for the preparation of planar waveguides, antireflective coatings, Bragg mirrors, etc. However, at high titania contents such materials exhibit high viscosities and tendency to phase separation. In this paper we present optical properties of films containing TiO2 which are prepared via a novel approach sol-gel on the basis of ternary Na2O-TiO2-SiO2 glasses and which can exhibit lower viscosities. Films of Na2O-TiO2-SiO2 systems were prepared from input sols mixed of silica, titania and sodium oxide sols. The silica sol was prepared from tetraethyl orthosilicate (TEOS), ethanol, hydrochloric acid and water, with a TEOS c= 2 mol/l and water/alkoxide ratio 1.75. The titania sol was mixed from titanium tetraisopropoxide (TiPr), propan-2-ol, nitric acid and water, c= 0.5 mol/l, RW= 0.42. The sodium oxide sols with c= 0.474 mol/l were prepared from sodium ethoxide and ethanol. Input sols were prepared by mixing the silica and titania sols first and then the sodium sol was added. The input sols were aged for one hour. Stable input sols were obtained. The input sols were deposited on glass and silica slides by dip-coating technique at a withdrawing speeds of 200 mm/min. Applied gel layers were thermally treated at temperatures of 450 and 900°C. Layers containing sodium oxide and titania in concentration ranges of 0-20 mol.% and 0-30 mol.% respectively have been fabricated. Optical properties of layers were determined by UV-VIS-NIR transmission and reflection spectrophotometry. Refractive indices of layers were determined by spectral ellipsometry and from transmission spectra. Optical properties were correlated with results of XRD spectroscopy, optical microscopy, and atomic force microscopy. Transparent homogenous films with a maximum refractive index of 1.61 at a wavelength of 600 nm have been obtained
    Trvalý link: http://hdl.handle.net/11104/0280666

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.