Influence of printing and loading direction on mechanical response in 3D printed models of human trabecular bone

0495148 - ÚTAM 2019 RIV CZ eng C - Konferenční příspěvek (zahraniční konf.)
Doktor, Tomáš - Kumpová, Ivana - Wroński, S. - Śniechowski, M. - Tarasiuk, J. - Forte, G. - Kytýř, Daniel
Influence of printing and loading direction on mechanical response in 3D printed models of human trabecular bone.
Acta Polytechnica CTU Proceedings. Vol. 18. Prague: Czech Technical University in Prague, 2018 - (Kytýř, D.; Major, Z.; Doktor, T.), s. 24-27. ISBN 978-80-01-06474-0. E-ISSN 2336-5382.
[Youth Symposium on Experimental Solid Mechanics /16./. Traunkirchen (AT), 17.05.2018-19.05.2018]
GRANT EU: European Commission(XE) ATCZ133 - Kompetenzzentrum MechanoBiologie
Institucionální podpora: RVO:68378297
Klíčová slova: additive manufacturing * tomography * deformation response
Obor OECD: Mechanical engineering
https://ojs.cvut.cz/ojs/index.php/APP/article/view/5082/4796

The paper deals with investigation on directional variations of mechanical response in 3D printed models of human trabecular bone. Sample of trabecular bone tissue was resected from human donor and 3D model was obtained by X-ray computed tomography. Then a series of cubical samples was prepared by additive manufacturing technique and tested by uniaxial compression loading mode. Mechanical response was compared in nine different combinations of direction of 3D printing and loading direction. The results show neglectible influence on the deformation response in elastic region (stiffness) and significant changes of the behaviour in plastic region (stress and strain at yield point, strain at full collapse).
Trvalý link: http://hdl.handle.net/11104/0288164