Počet záznamů: 1  

Ion microprobe improvements in Tandetron Laboratory NPI CAS: Numerical calculation

  1. 1.
    0509714 - ÚJF 2020 RIV NL eng J - Článek v odborném periodiku
    Romanenko, Oleksandr V. - Ponomarev, A. G. - Macková, Anna - Havránek, Vladimír - Ponomarov, A.
    Ion microprobe improvements in Tandetron Laboratory NPI CAS: Numerical calculation.
    Nuclear Instruments & Methods in Physics Research Section B. Roč. 458, č. 11 (2019), s. 77-81. ISSN 0168-583X. E-ISSN 1872-9584
    Grant CEP: GA MŠMT EF16_013/0001812; GA ČR(CZ) GBP108/12/G108; GA MŠMT LM2015056
    Institucionální podpora: RVO:61389005
    Klíčová slova: nuclear microprobe * spaced triplet * acceptance * spatial resolution
    Obor OECD: Nuclear physics
    Impakt faktor: 1.270, rok: 2019
    Způsob publikování: Omezený přístup
    https://doi.org/10.1016/j.nimb.2019.08.007

    Ion scanning microprobe was implemented in the Tandetron Laboratory, Nuclear Physics Institute of the Czech Academy of Sciences (NPI CAS) in Rez in 2009. Rez microprobe is coupled with a tandetron accelerator, which provides ions from hydrogen to gold, and able to focus heavy ions with the maximum mass energy product at the level 11 MeV amu/q(2). Therefore, microprobe can be used for polymers irradiation by protons and helium as well as for irradiation of various types of glass and other materials with heavy ions. The number of applications for the microprobe in the Tandetron Laboratory is constantly increasing, that leads to the necessity to raise the efficiency of the microprobe operation. Increasing the beam current density allows for a reduction in the time per experiment in relation to recording the number of events. The present work is an attempt to improve the parameters of existing ion scanning microprobe based on a compact Oxford triplet lens system. Since the microprobe is used to investigate both thin and thick targets, the position of the detectors that can restrict the microprobe construction were taken into account in the calculation. The collimated acceptance of the probe-forming system was selected as an objective function as it takes into account both chromatic and all spherical aberrations. Two methods for improving the microprobe parameters were considered. The first one is based on separation of the first lens in the system, whilst the second - on decreasing the working distance. Both ways need changing in the microprobe construction, but the last one requires a major alteration in a target chamber. The benefits of each way were studied. Obtained parameters of the new probe-forming system have shown a two fold increase of the current density of the given probe size for Rez microprobe in comparison with the present system. The benefits of the displacement of the first lens disappear with the decreasing of the working distance.
    Trvalý link: http://hdl.handle.net/11104/0300362

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.