0543333 - ÚFP 2022 RIV US eng J - Článek v odborném periodiku
Biesuz, Mattia - Ometto, L. - Tyrpekl, V. - Vilémová, Monika - Sglavo, V. M.
On the power density at the onset for flash sintering in ceramic composites.
Scripta Materialia. Roč. 201, August (2021), č. článku 113984. ISSN 1359-6462. E-ISSN 1872-8456
Grant CEP: GA MŠMT(CZ) EF18_053/0016925
Institucionální podpora: RVO:61389021
Klíčová slova: Ceramic composites * Flash sintering * Flash sintering mechanisms * Joule heating * Sintering
Obor OECD: Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics
Impakt faktor: 6.302, rok: 2021 ; AIS: 1.221, rok: 2021
Způsob publikování: Omezený přístup
Web výsledku:
https://www.sciencedirect.com/science/article/pii/S1359646221002645?via%3DihubDOI: https://doi.org/10.1016/j.scriptamat.2021.113984

Flash sintering is usually said to be activated in a narrow range of power density regardless of the onset flash temperature and material. However, the typical logarithmic scale employed in the flash power plots could hide some finer tendencies in the flash onset conditions. Herein, we investigated the flash onset in YSZ/Al2O3 composites taking into account the power density normalized to the total composite (won-comp) and the conductive phase volume (won-YSZ). The results show that at the flash onset (i) won-YSZ strongly increases with the Al2O3 amount in the composite, (ii) won-comp weakly depends on the composite composition, and (iii) both won-comp and won-YSZ increase with the flash onset temperature (which is a function of the electric field). The results offer new light on the mechanisms of flash ignition and a new insight on the power required to activate the phenomenon, which appears to be consistent with a thermally-driven process.
Trvalý link: http://hdl.handle.net/11104/0320556