LIPSS‑based functional surfaces produced by multi‑beam nanostructuring with 2601 beams and real‑time thermal processes measurement

0549579 - FZÚ 2022 RIV GB eng J - Článek v odborném periodiku
Hauschwitz, Petr - Martan, J. - Bičišťová, Radka - Beltrami, C. - Moskal, D. - Brodsky, A. - Kaplan, N. - Mužík, Jiří - Štěpánková, Denisa - Brajer, Jan - Rostohar, Danijela - Kopeček, Jaromír - Prokešová, L. - Honner, M. - Lang, V. - Smrž, Martin - Mocek, Tomáš
LIPSS‑based functional surfaces produced by multi‑beam nanostructuring with 2601 beams and real‑time thermal processes measurement.
Scientific Reports. Roč. 11, č. 1 (2021), č. článku 22944. ISSN 2045-2322. E-ISSN 2045-2322
Grant CEP: GA MŠMT EF15_006/0000674; GA MŠMT LO1602
GRANT EU: European Commission(XE) 739573 - HiLASE CoE
Grant ostatní: OP VVV - HiLASE-CoE(XE) CZ.02.1.01/0.0/0.0/15_006/0000674
Institucionální podpora: RVO:68378271
Klíčová slova: ultrashort high-energy pulsed laser * diffractive optical element * LIPSS
Obor OECD: Optics (including laser optics and quantum optics)
Impakt faktor: 4.997, rok: 2021
Způsob publikování: Open access

A combination of the ultrashort high-energy pulsed las. syst. with exceptional beam quality and a novel DOE enables simultaneous production of 2601 spots organized in the square-shaped 1×1mm matrix in less than 0.01ms.By adjusting the las. and processing parameters each spot can contain LIPSS,ripples,including high-spatial freq. LIPSS and low-spatial freq. LIPSS.DOE placed before galvanometric scanner allows easy integration and stitching of the pattern over larger areas.The LIPSS formation was monitored for using fast infrared radiometry for verification of real-time quality control possibilities.During the LIPSS fabrication,solidification plateaus were observed after each las. pulse,which enables process control by monitoring heat accumulation or plateau length using a new signal derivation approach.Analysis of solidification plateaus after each las. pulse enabled dynamic calibration of the measurement.
Trvalý link: http://hdl.handle.net/11104/0325582