Aim of this work is the comparison of different turbulent models based on the Reynolds Averaged Navier-Stokes (RANS) equations in order to find out which model is the most suitable for the study of the channel thermal-hydraulics of the TRIGA Mark II reactor. Only the steady state behaviour (i.e. the full power stationary operational conditions) of the reactor has been considered. To this end, the RAS (Reynolds-Averaged Simulation) models available in the open source CFD software OpenFOAM have been applied to the most internal channel of the TRIGA and assessed against a Large Eddy Simulation (LES) model. The results of the latter approach, expressed in terms of axial velocity, turbulent viscosity, turbulent kinetic energy, and temperature have been compared with the results obtained by the RAS models available in OpenFOAM (k − ε, k − ω and Reynolds Stress Transport). Heat transfer is taken into account as well by means of the turbulent energy diffusivity parameter. The simulation results demonstrate how, amongst the RAS models, the k − ω SST is the one whose results are closer to the LES simulation. This model seems to be the best one for the treatment of turbulent flow within the TRIGA subchannel, offering a good compromise between accuracy and computational requirements. Since it is much less expensive than an LES model, it can be applied even to full core calculation, in order to obtain accurate results with less computational effort.

Comparison of Several RANS Modelling for the Pavia TRIGA Mark II Research Reactor

Carolina Introini;Antonio Cammi;Stefano Lorenzi;
2017-01-01

Abstract

Aim of this work is the comparison of different turbulent models based on the Reynolds Averaged Navier-Stokes (RANS) equations in order to find out which model is the most suitable for the study of the channel thermal-hydraulics of the TRIGA Mark II reactor. Only the steady state behaviour (i.e. the full power stationary operational conditions) of the reactor has been considered. To this end, the RAS (Reynolds-Averaged Simulation) models available in the open source CFD software OpenFOAM have been applied to the most internal channel of the TRIGA and assessed against a Large Eddy Simulation (LES) model. The results of the latter approach, expressed in terms of axial velocity, turbulent viscosity, turbulent kinetic energy, and temperature have been compared with the results obtained by the RAS models available in OpenFOAM (k − ε, k − ω and Reynolds Stress Transport). Heat transfer is taken into account as well by means of the turbulent energy diffusivity parameter. The simulation results demonstrate how, amongst the RAS models, the k − ω SST is the one whose results are closer to the LES simulation. This model seems to be the best one for the treatment of turbulent flow within the TRIGA subchannel, offering a good compromise between accuracy and computational requirements. Since it is much less expensive than an LES model, it can be applied even to full core calculation, in order to obtain accurate results with less computational effort.
2017
Proceedings of the International Conference Nuclear Energy for New Europe (NENE 2017)
978-961-6207-42-3
File in questo prodotto:
File Dimensione Formato  
NENE2017_508.pdf

Accesso riservato

Descrizione: Articolo principale
: Publisher’s version
Dimensione 2.38 MB
Formato Adobe PDF
2.38 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1048658
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? 2
social impact