This article presents manufacturing of exemplary knee prostheses using selective laser melting (SLM) technology. All phases of design and production are considered, from acquisition of the STL build file to optimization of process parameters, printing and post-build heat treatments. Geometric differences are acquired and compared with a 3D scanner.
Fabrication of knee prostheses by means of SLM: Process and functional characterization / Liverani, Erica; Conconi, Michele; Sancisi, Nicola; Lutey, Adrian H. A.; Ascari, Alessandro; Fortunato, Alessandro. - 1:(2018), p. V001T01A009. (Intervento presentato al convegno ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018 tenutosi a usa nel 2018) [10.1115/MSEC2018-6496].
Fabrication of knee prostheses by means of SLM: Process and functional characterization
Lutey, Adrian H. A.;
2018-01-01
Abstract
This article presents manufacturing of exemplary knee prostheses using selective laser melting (SLM) technology. All phases of design and production are considered, from acquisition of the STL build file to optimization of process parameters, printing and post-build heat treatments. Geometric differences are acquired and compared with a 3D scanner.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
