Influence of PZT insertion on Portland cement curing process and piezoelectric properties of 0–3 cement-based composites by impedance spectroscopy
Nenhuma Miniatura disponível
Data
2020-03-30
Autores
Santos, J. A. [UNESP]
Sanches, A. O. [UNESP]
Akasaki, J. L. [UNESP]
Tashima, M. M. [UNESP]
Longo, E.
Malmonge, J. A. [UNESP]
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
0–3 Cement-based piezoelectric composites were produced. It was verified that not only the piezoelectric properties of the composites, but also the influence of piezoelectric phase in the cement paste curing process. The results showed that the final piezoelectric and dielectric properties of the composites depend mainly on the interfacial microstructure between the matrix and the piezoelectric insertion. DC conductivity and impedance spectroscopy measurements showed a high sensitivity to the identification of retard hydration process or phase transformations. Piezoelectric properties show ageing fluctuations, attributed to the cement curing process which promoted unstable dipoles at the same time that it promoted piezoelectric phase constriction.
Descrição
Palavras-chave
Cement-based composites, Impedance spectroscopy, Interface, Sensor
Como citar
Construction and Building Materials, v. 238.