Thermal decomposition of wood fibers: Thermal simulation using the f-test statistical tool
Nenhuma Miniatura disponível
Data
2021-01-01
Autores
Ornaghi, Heitor L.
Ornaghi, Felipe Gustavo
Neves, Roberta Motta
De Oliveira, Daniel Magalhães [UNESP]
Poletto, Matheus
Título da Revista
ISSN da Revista
Título de Volume
Editor
Resumo
Wood biomass is an alternative for fossil fuels to produce bioenergy, due to its low cost, renewability and environmental friendliness. In order to use biomass as an energy source, understanding its thermal degradation behavior is highly recommended. This work focuses on the thermal degradation of wood fibers belonging to different species (Pinus elliotti (PIE), Eucalyptus grandis (EUG) and Mezilaurus itauba (ITA)), commonly used by the Brazilian lumber industry. The prediction of their degradation kinetics and overall thermal behavior was performed based on the most common theoretical data using the F-test statistical tool. The most probable degradation mechanism was found to be autocatalytic for all the wood fibers tested, with three different degradation steps. The results obtained were in accordance with the findings recently reported in the literature using other fitting methods. It was found that cellulose is the major contributor to Arrhenius parameters, while hemicelluloses – to reaction order.
Descrição
Palavras-chave
Model-fitting, Modelling and simulation, Pyrolysis, Thermal decomposition, Wood fiber
Como citar
Cellulose Chemistry and Technology, v. 55, n. 3-4, p. 231-241, 2021.