Fractografia quantitativa de superfícies obtidas em ensaios de propagação de trincas por fadiga em aço inoxidável 15 –5PH

Carregando...
Imagem de Miniatura

Data

2012-01-26

Autores

Marques, Thais Peres Zanetine [UNESP]

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Estadual Paulista (Unesp)

Resumo

Superfícies de fratura apresentam a evolução entrópica durante a propagação de trincas, demonstrando relações entre componentes estruturais, campos de tensões locais e formações típicas de relevo. No caso das ligas metálicas, a evolução das formações topográficas pode indicar as linhas de ação de carga, a dinâmica do processo de fratura, falhas de uso ou de processamento, e outros. Neste trabalho, foram realizadas análises da relação entre a dimensão fractal e a variação do fator intensidade de tensão, da relação entre a dimensão fractal e a posição à frente da trinca, além do estudo da influência da espessura nos valores de dimensão fractal. Esses estudos foram efetuados a partir da topografia das superfícies fraturadas do aço 15-5PH obtidas em ensaios de propagação de trincas por fadiga, conforme ASTM E647. A investigação das fraturas foi feita por meio do método de reconstrução por extensão de foco, com o qual foi possível calcular os valores de dimensão monofractal (Df), dimensão textural (Dt) e dimensão estrutural (Ds), utilizando os mapas de elevações gerados pelo método. Os resultados das análises mostraram que os valores de Ds foram sensíveis à mudança dos micromecanismos de fratura, sendo que eles aumentaram até a transição do estágio II para o estágio III, sofrendo uma leve queda quando a trinca se propagava de forma instável e, em seguida, voltaram a aumentar quando a trinca estava perto de atingir seu tamanho crítico. Também foi observado que os valores de Ds e Dt se comportaram de forma inversa com o aumento da velocidade de propagação da trinca, em que os valores de Ds aumentaram e os de Dt decresceram em relação à evolução de K. Sendo, então, a dimensão estrutural responsável por descrever o comportamento anisotrópico do relevo, devido à evolução...
Fracture surfaces present the entropic evolution during the crack propagation, demonstrating relationship between structural components, local stress fields and typical relief formation. Regarding metallic alloys, the evolution of topographical formations may indicate the load action lines, the dynamism of the fracture process, during the processing or in use failures. In this work, it was performed the analysis of the relation between the fractal dimension and the stress intensity factor deviation, the relation between the fractal dimension and the crack tip position and also the study of the thickness influence in the fractal dimension values. These studies were performed by means of the topography of the 15-5PH steel fracture surfaces obtained throughout the fatigue crack propagation tests, in accordance with ASTM E647. The fractures investigation was executed using the 3-D reconstruction by extended depth of field method, allowing the possibility to calculate the values of the monofractal dimension (Df), textural dimension (Dt) and structural dimension (Ds), using of the elevation maps generated by the method. The analysis results showed that Ds was sensitive to changes on fracture micromechanisms, once they have increased up to the stage II to stage III transition, appearing a smooth reduction during the crack propagation at the unstable region and, after this, the values turned back to increase when the crack was near to achieve the critical length. It was also observed the Ds and Dt values presented an inverse behavior due the increase of the crack propagation velocity, while Ds raised the Dt values diminished related to the K evolution. Hence, the structural dimension is the responsible to describe the anisotropic behavior of the relief due the stress fields evolution in the crack tip... (Complete abstract click eletronic access below)

Descrição

Palavras-chave

Fractografia, Aço - Fadiga, Aço inoxidavel - Fraturas, Quantitative fractography

Como citar

MARQUES, Thais Peres Zanetine. Fractografia quantitativa de superfícies obtidas em ensaios de propagação de trincas por fadiga em aço inoxidável 15 –5PH. 2012. 97 f. Dissertação (mestrado) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2012.