Numerical results on the exploitation of gold nanostructures in plastic optical fibers based plasmonic sensors

The use of Nanostructured SPR sensors on Plastic Optical Fibers opens new challenges, because in an SPR sensor made by a continuous metal layer, the sensor’s response is basically related to the metal properties at optical frequencies and to the waveguide characteristics. On the other hand, when a Nanostructured SPR sensor is used, the behavior is also related to the geometric parameters of the Nanostructures. Working on them it is potentially possible to tune the sensor’s behavior. In this work the Authors present a numerical investigation in order to evaluate the behavior of two different SPR Nanostructured platforms, made by “long” gold Nanorods, and comparing them to an SPR sensor with a continuous gold layer. The difference between these two Nanostructured platforms is the orientation of the Nanorods, with respect to the light’s propagation direction. The numerical results seem to indicate an increase of the sensitivity, when an SPR Sensor with long Nanorods is used, with respect to the sensor made by a continuous gold film, with some benefits.