This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzobisoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the composite strips influences the post-peak response if debonding does not occur equally in both strips. Values of the ultimate (peak) stress determined using double-lap shear tests are generally consistent with, although slightly lower than, those determined by single-lap shear tests when the bonded length is longer than the effective bond length.

A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests

D'ANTINO, TOMMASO;PELLEGRINO, CARLO
2015

Abstract

This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzobisoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the composite strips influences the post-peak response if debonding does not occur equally in both strips. Values of the ultimate (peak) stress determined using double-lap shear tests are generally consistent with, although slightly lower than, those determined by single-lap shear tests when the bonded length is longer than the effective bond length.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11577/3170174
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 103
  • ???jsp.display-item.citation.isi??? 89
social impact