English
 
Help Privacy Policy Disclaimer
  Advanced SearchBrowse

Item

ITEM ACTIONSEXPORT

Released

Journal Article

Comparing dense and porous membranes for the application in membrane reactors

MPS-Authors
/persons/resource/persons86477

Seidel-Morgenstern,  A.
Physical and Chemical Foundations of Process Engineering, Max Planck Institute for Dynamics of Complex Technical Systems, Max Planck Society;
Otto-von-Guericke-Universität Magdeburg, External Organizations;

External Resource
No external resources are shared
Fulltext (restricted access)
There are currently no full texts shared for your IP range.
Fulltext (public)
There are no public fulltexts stored in PuRe
Supplementary Material (public)
There is no public supplementary material available
Citation

Schramm, O., & Seidel-Morgenstern, A. (1999). Comparing dense and porous membranes for the application in membrane reactors. Chemical Engineering Science, 54(10), 1447-1454. doi: 10.1016/S0009-2509(99)00062-7.


Cite as: https://hdl.handle.net/11858/00-001M-0000-0013-A299-E
Abstract
The performance of a membrane reactor using two types of membranes has been studied experimentally. A modified Wicke-Kallenbach cell consisting of two well mixed compartments separated by flat membrane discs was used to investigate mass transfer and reaction separately and simultaneously. At first the mass transfer through a porous glass membrane was characterized. Then this membrane was modified with a thin palladium layer by an electroless plating technique. The changes in selectivity and flux were quantified with permeation experiments. Due to remaining defects in the deposited Pd-layer, an appropriate permeation model had to be developed based on the combination of the Dusty Gas Model (DGM) and the Solution Diffusion Model (SDM). Furthermore, the reaction kinetics of the dehydrogenation of cyclohexanol catalyzed by a conventional Pd-catalyst were determined in the slightly modified experimental setup. Finally the separately studied processes were performed simultaneously in the membrane reactor. The experimental results were evaluated using a theoretical model taking into account the observed transport properties of the two membranes and the application of an inert as well as a reactive sweep gas. Copyright © 2014 Elsevier B.V. except certain content provided by third parties. [accessed 2014 October 16]