Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/30351
Título: | Implementação laboratorial de ensaios para avaliação das características de fratura das misturas betuminosas |
Outro(s) título(s): | Implementation of laboratory tests for assessment of fracture properties of asphalt mixtures |
Autor(es): | Veiga, Miriam Sofia Pires Pereira da |
Orientador(es): | Pais, Jorge C. Minhoto, Manuel J. C. |
Palavras-chave: | Misturas betuminosas Fendas Ensaios de fratura Propriedades de fratura Asphalt mixtures Cracking Fracture tests Fracture properties |
Data: | 2012 |
Resumo(s): | O estudo do fendilhamento dos pavimentos rodoviários é realizado através da avaliação
das propriedades de fadiga e/ou de fratura das misturas betuminosas. A primeira dá uma
indicação do início do fendilhamento, ou seja da perda de resistência da mistura,
considerando que este se inicia na base das camadas betuminosas. No segundo método
avalia-se o fendilhamento observando a progressão das fendas ao longo da mistura.
Com este trabalho pretende-se implementar em laboratório ensaios que permitem
observar a progressão da fenda ao longo da mistura betuminosa, ou seja ensaios de
fratura e verificar a sua aplicabilidade na obtenção das propriedades de fratura das
misturas betuminosas.
Foram realizados os ensaios de tração em disco, flexão em viga, flexão em provete
semicircular e tração direta em provete prismático. Com os resultados dos ensaios
obteve-se vários parâmetros que permitem caraterizar as propriedades de fratura das
misturas betuminosas. Fez-se ainda uma correlação de resultados de fratura e outros
ensaios de caraterização mecânica das misturas betuminosas
Os resultados dos ensaios evidenciaram a influência da granulometria na energia de
fratura e na força de pico das misturas convencionais. Permitiram ainda avaliar o
comportamento de misturas modificadas com incorporação de fibras têxteis à
fracturação. The study of cracking in pavements is accomplished by the evaluation of the fatigue or fracture properties of the asphalt mixtures. The first ones gives the indication of the cracking beginning, usually expressed by the loss of strength of the asphalt mixtures, considering that the cracking starts at the bottom of the asphalt layers. In the second case, the cracking is evaluated by the assessment of the cracking propagation throughout the cracking mixture. This work intends to develop laboratory tests to observe the cracking propagation throughout the asphalt mixtures, i.e., fracture test and to verify the applicability of these tests in the assessment of the fracture properties of asphalt mixtures. In this work fracture tests using the disk-shaped, bending beam, semi-circular bending and direct traction were performed. The laboratory tests allowed to obtain the parameters to characterize the fracture properties of the asphalt mixtures. A correlation between the fracture tests and mechanical tests of asphalt mixtures characterization was carried out. The test results showed the influence of the aggregate gradation in the fracture energy and the strength of the conventional asphalt mixtures studied in this work. Also, the behavior of textile fibers asphalt mixtures was evaluated. |
Tipo: | Dissertação de mestrado |
Descrição: | Dissertação de mestrado integrado em Engenharia Civil |
URI: | https://hdl.handle.net/1822/30351 |
Acesso: | Acesso aberto |
Aparece nas coleções: | BUM - Dissertações de Mestrado C-TAC - Dissertações de Mestrado |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Dissertação_Miriam_Veiga.pdf | 3,24 MB | Adobe PDF | Ver/Abrir |