Advanced search
1 file | 1.53 MB Add to list

Comparison of the physicochemical properties and aging behavior of two different APTES-derived plasma polymer-based coatings

Tim Egghe (UGent) , Mehrnoush Narimisa (UGent) , Rouba Ghobeira (UGent) , Bernard Nisol (UGent) , Yuliia Onyshchenko (UGent) , Richard Hoogenboom (UGent) , Rino Morent (UGent) and Nathalie De Geyter (UGent)
Author
Organization
Project
Abstract
Recently, new plasma polymerization-based techniques emerged to deposit chemically functional coatings for various applications. However, little is known on the aging of these layers. Therefore, this study aims to investigate the physicochemical properties of aerosol-assisted atmospheric pressure plasma deposited (3-aminopropyl)triethoxysilane-based (AAPD-APTES) coatings and compare their aging behavior to APTES-modified plasma polymerized hexamethyldisiloxane-based coatings (ppHMDSO-APTES). X-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle (WCA) and atomic force microscopy (AFM) measurements indicated that the applied power had an insignificant impact on the wettability, chemistry and morphology of the AAPD-APTES films. A complex nitrogen-containing organosilicon layer was obtained with significant preservation of the Si-O-C-bonds. For the ppHMDSO-APTES coatings, XPS indicated that these layers had a significantly higher amount of preserved primary amines and a different surface morphology. Oxidation and hydrolysis of Si-O-C-bonds were the most prevalent aging processes for the AAPD-APTES coatings, while protonation of primary amines was most important for the ppHMDSOAPTES films. This study indicates that further research is needed to examine the differences in coating chemistry and aging of other AAPD-based and conventional plasma polymers. Additionally, it provides a reference to decide which coating type and associated aging processes are preferred for certain applications.
Keywords
Plasma polymerization, Aerosol -assisted atmospheric pressure plasma, deposition, Plasma -enhanced chemical vapor deposition, (3-Aminopropyl)triethoxysilane, Aging, FILMS, DEPOSITION, STABILITY, XPS, SURFACES, IMMOBILIZATION, SILANIZATION, PARAMETERS, LAYERS

Downloads

  • CQG41Y~C.PDF
    • full text (Accepted manuscript)
    • |
    • open access
    • |
    • PDF
    • |
    • 1.53 MB

Citation

Please use this url to cite or link to this publication:

MLA
Egghe, Tim, et al. “Comparison of the Physicochemical Properties and Aging Behavior of Two Different APTES-Derived Plasma Polymer-Based Coatings.” SURFACE & COATINGS TECHNOLOGY, vol. 449, Elsevier Science SA, 2022, doi:10.1016/j.surfcoat.2022.128945.
APA
Egghe, T., Narimisa, M., Ghobeira, R., Nisol, B., Onyshchenko, Y., Hoogenboom, R., … De Geyter, N. (2022). Comparison of the physicochemical properties and aging behavior of two different APTES-derived plasma polymer-based coatings. SURFACE & COATINGS TECHNOLOGY, 449. https://doi.org/10.1016/j.surfcoat.2022.128945
Chicago author-date
Egghe, Tim, Mehrnoush Narimisa, Rouba Ghobeira, Bernard Nisol, Yuliia Onyshchenko, Richard Hoogenboom, Rino Morent, and Nathalie De Geyter. 2022. “Comparison of the Physicochemical Properties and Aging Behavior of Two Different APTES-Derived Plasma Polymer-Based Coatings.” SURFACE & COATINGS TECHNOLOGY 449. https://doi.org/10.1016/j.surfcoat.2022.128945.
Chicago author-date (all authors)
Egghe, Tim, Mehrnoush Narimisa, Rouba Ghobeira, Bernard Nisol, Yuliia Onyshchenko, Richard Hoogenboom, Rino Morent, and Nathalie De Geyter. 2022. “Comparison of the Physicochemical Properties and Aging Behavior of Two Different APTES-Derived Plasma Polymer-Based Coatings.” SURFACE & COATINGS TECHNOLOGY 449. doi:10.1016/j.surfcoat.2022.128945.
Vancouver
1.
Egghe T, Narimisa M, Ghobeira R, Nisol B, Onyshchenko Y, Hoogenboom R, et al. Comparison of the physicochemical properties and aging behavior of two different APTES-derived plasma polymer-based coatings. SURFACE & COATINGS TECHNOLOGY. 2022;449.
IEEE
[1]
T. Egghe et al., “Comparison of the physicochemical properties and aging behavior of two different APTES-derived plasma polymer-based coatings,” SURFACE & COATINGS TECHNOLOGY, vol. 449, 2022.
@article{01GVZJTKKNKXTD3Y5DH9SXQN7X,
  abstract     = {{Recently, new plasma polymerization-based techniques emerged to deposit chemically functional coatings for various applications. However, little is known on the aging of these layers. Therefore, this study aims to investigate the physicochemical properties of aerosol-assisted atmospheric pressure plasma deposited (3-aminopropyl)triethoxysilane-based (AAPD-APTES) coatings and compare their aging behavior to APTES-modified plasma polymerized hexamethyldisiloxane-based coatings (ppHMDSO-APTES). X-ray photoelectron spectroscopy (XPS), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), water contact angle (WCA) and atomic force microscopy (AFM) measurements indicated that the applied power had an insignificant impact on the wettability, chemistry and morphology of the AAPD-APTES films. A complex nitrogen-containing organosilicon layer was obtained with significant preservation of the Si-O-C-bonds. For the ppHMDSO-APTES coatings, XPS indicated that these layers had a significantly higher amount of preserved primary amines and a different surface morphology. Oxidation and hydrolysis of Si-O-C-bonds were the most prevalent aging processes for the AAPD-APTES coatings, while protonation of primary amines was most important for the ppHMDSOAPTES films. This study indicates that further research is needed to examine the differences in coating chemistry and aging of other AAPD-based and conventional plasma polymers. Additionally, it provides a reference to decide which coating type and associated aging processes are preferred for certain applications.}},
  articleno    = {{128945}},
  author       = {{Egghe, Tim and Narimisa, Mehrnoush and Ghobeira, Rouba and Nisol, Bernard and Onyshchenko, Yuliia and Hoogenboom, Richard and Morent, Rino and De Geyter, Nathalie}},
  issn         = {{0257-8972}},
  journal      = {{SURFACE & COATINGS TECHNOLOGY}},
  keywords     = {{Plasma polymerization,Aerosol -assisted atmospheric pressure plasma,deposition,Plasma -enhanced chemical vapor deposition,(3-Aminopropyl)triethoxysilane,Aging,FILMS,DEPOSITION,STABILITY,XPS,SURFACES,IMMOBILIZATION,SILANIZATION,PARAMETERS,LAYERS}},
  language     = {{eng}},
  pages        = {{14}},
  publisher    = {{Elsevier Science SA}},
  title        = {{Comparison of the physicochemical properties and aging behavior of two different APTES-derived plasma polymer-based coatings}},
  url          = {{http://doi.org/10.1016/j.surfcoat.2022.128945}},
  volume       = {{449}},
  year         = {{2022}},
}

Altmetric
View in Altmetric
Web of Science
Times cited: