Advanced search
1 file | 696.18 KB Add to list

Optimization for stability of the deformable FlexyDos3D radiation dosimeter and curing effects

Author
Organization
Abstract
Previous formulations of the FlexyDos3D dosimeter have shown significant changes in the dose-response over time. In this study, various formulations of the dosimeter were created and tested to see if this stability could be improved. A dosimeter that was stable over a three-day period was found. Rapid manufacture of this dosimeter for patient-specific validation of radiotherapy treatments is desirable. The use of 3D printing manufacturing techniques for thermosetting polymers require high temperatures to cure the polymer within a reasonable time. The effect of different curing temperatures and times were investigated for the FlexyDos3D radiation dosimeter for its effect on stability. No significant difference in the dose-response was found for dosimeters cured for different curing times beyond an hour. A significant dose-response offset was found between dosimeters cured at different temperatures, but the dose-response sensitivity was the same.

Downloads

  • published.pdf
    • full text (Published version)
    • |
    • open access
    • |
    • PDF
    • |
    • 696.18 KB

Citation

Please use this url to cite or link to this publication:

MLA
Wheatley, M. J., et al. “Optimization for Stability of the Deformable FlexyDos3D Radiation Dosimeter and Curing Effects.” 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE), vol. 1305, IOP, 2019, doi:10.1088/1742-6596/1305/1/012030.
APA
Wheatley, M. J., Balatinac, A. S., Booth, J. T., & De Deene, Y. (2019). Optimization for stability of the deformable FlexyDos3D radiation dosimeter and curing effects. 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE), 1305. https://doi.org/10.1088/1742-6596/1305/1/012030
Chicago author-date
Wheatley, M. J., A. S. Balatinac, J. T. Booth, and Yves De Deene. 2019. “Optimization for Stability of the Deformable FlexyDos3D Radiation Dosimeter and Curing Effects.” In 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE). Vol. 1305. IOP. https://doi.org/10.1088/1742-6596/1305/1/012030.
Chicago author-date (all authors)
Wheatley, M. J., A. S. Balatinac, J. T. Booth, and Yves De Deene. 2019. “Optimization for Stability of the Deformable FlexyDos3D Radiation Dosimeter and Curing Effects.” In 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE). Vol. 1305. IOP. doi:10.1088/1742-6596/1305/1/012030.
Vancouver
1.
Wheatley MJ, Balatinac AS, Booth JT, De Deene Y. Optimization for stability of the deformable FlexyDos3D radiation dosimeter and curing effects. In: 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE). IOP; 2019.
IEEE
[1]
M. J. Wheatley, A. S. Balatinac, J. T. Booth, and Y. De Deene, “Optimization for stability of the deformable FlexyDos3D radiation dosimeter and curing effects,” in 10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE), Duke Kunshan Univ, Kunshan, China, 2019, vol. 1305.
@inproceedings{8691626,
  abstract     = {{Previous formulations of the FlexyDos3D dosimeter have shown significant changes in the dose-response over time. In this study, various formulations of the dosimeter were created and tested to see if this stability could be improved. A dosimeter that was stable over a three-day period was found. Rapid manufacture of this dosimeter for patient-specific validation of radiotherapy treatments is desirable. The use of 3D printing manufacturing techniques for thermosetting polymers require high temperatures to cure the polymer within a reasonable time. The effect of different curing temperatures and times were investigated for the FlexyDos3D radiation dosimeter for its effect on stability. No significant difference in the dose-response was found for dosimeters cured for different curing times beyond an hour. A significant dose-response offset was found between dosimeters cured at different temperatures, but the dose-response sensitivity was the same.}},
  articleno    = {{012030}},
  author       = {{Wheatley, M. J. and Balatinac, A. S. and Booth, J. T. and De Deene, Yves}},
  booktitle    = {{10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE)}},
  issn         = {{1742-6588}},
  language     = {{eng}},
  location     = {{Duke Kunshan Univ, Kunshan, China}},
  pages        = {{6}},
  publisher    = {{IOP}},
  title        = {{Optimization for stability of the deformable FlexyDos3D radiation dosimeter and curing effects}},
  url          = {{http://doi.org/10.1088/1742-6596/1305/1/012030}},
  volume       = {{1305}},
  year         = {{2019}},
}

Altmetric
View in Altmetric
Web of Science
Times cited: