Evaluar el uso del polímero Floquat 2565 para tratamiento de aguas naturales en la planta Francisco Wiesner
Fecha
2017Autor
Zuleta Romero, Diana Milena
Director(es)
Suarez Escobar, Andrés Felipe
Documentos PDF
Resumen
Con el fin de sustituir el Sulfato de Aluminio por el polímero floculante FLOQUAT 2565, se realizaron 13 simulaciones, dando prioridad al polímero para evaluar su actividad floculante en el agua proveniente del parque Nacional de Chingaza, obteniendo un cambio favorable. Este polímero fue caracterizado inicialmente con diversas técnicas fisicoquímicas, las cuales me permitieron identificar las características que lo hacen diferente y de mejor rendimiento que el sulfato de aluminio. De igual manera se identifica la dosis más adecuada para el manejo de polímero en la planta Francisco Wiesner estando ésta en un promedio de 0,7ppm para un caudal diario de 10m3/s aproximadamente consumiendo por día 1.300Kg. El polímero es usado igualmente condiciones máximas donde el pH está en 7 al ingresar a planta. Comparando los resultados obtenidos, tratando el agua con polímero y con sulfato cada uno por separado, al realizar los análisis fisicoquímicos y microbiológicos que son los que indican que tan eficiente es el producto, se encuentra que el polímero después de 2 horas que dura la planta en estabilizar tiene mayor capacidad de coagulación, retiene mayor parte microbiológica, se utiliza en menores cantidades, no afecta pH , remueve el color del agua, los filtros tiene mayor duración puesto que la formación del floc es más consistente, los log de remoción tienen un promedio del 97%. Teniendo en cuenta que el comportamiento del polímero trae un beneficio para el tratamiento de agua en la planta F.W. se procede a evaluar las condiciones y dosis necesarias para el caudal diario. Debido a que el polímero reemplaza en 10ppm al sulfato, se gaste en menores cantidades del sulfato lo que genera un ahorro a largo plazo en productos químicos.
Resumen en idioma extranjero
In order to replace the aluminium sulphate with polymer flocculant FLOQUAT 2535, a total of thirteen simulations were done, prioritizing this polymer to evaluate its flocculant action in waters from Chingaza National Park, obtaining a favorable change. This polymer was first characterized using several physico-chemical techniques, which made it possible to identify its distinctive characteristics and the particular characteristics that make it of higher yield than aluminium sulphate. Likewise, it was identified that the most adequate doses for handling the polymer in the Francisco Wiesner plant was 0.7ppm, corresponding to a daily water volume of around 10m3/s consuming 1,300 kg per day. The polymer is also used in maximum conditions where the pH is 7 when entering to the plant. By comparing the results obtained, treating the water with the polymer and sulphate separately, making physicochemical and microbiological analyses, which indicate how efficiently the product is, it is concluded that after the two hours that the plant requires to get stabilized, the polymer has a higher capacity of clotting, holds a major microbiological sample, is used in smaller quantities, does not affect the pH, removes the color of the water, and the filters have a longer lifespan because the floc is more consistent and the log removal has an average of 97%. Considering that the behavior of the polymer benefits the water treatment in the F. W’s plant, the required conditions and doses for the daily water volume are then evaluated. Because of sulphate replace with 10ppm polymer, the polymer is spent in smaller quantities than the sulphate, resulting in long-term chemicals savings.
Colecciones
- Ingeniería Química [78]
Estadísticas Google Analytics
Comentarios
Respuesta Comentario Repositorio Expeditio
Gracias por tomarse el tiempo para darnos su opinión.