Navegar

Colección

Datos Estadísticas

Artículo

Piovano, S.; Salierno, G.L.; Montmany, E.; D'Agostino, M.; Maestri, M.; Cassanello, M. "Bed expansion and particle classification in liquid fluidized beds with structured internals" (2015) Chemical Engineering and Technology. 38(3):423-430
Estamos trabajando para incorporar este artículo al repositorio
Consulte el artículo en la página del editor
Consulte la política de Acceso Abierto del editor

Abstract:

The inclusion of a structured packing as internal in a liquid-solid fluidized bed allows expansion of the liquid velocity operation range before elutriation, promoting the liquid solid contact and mixing. The bed expansion of liquid-solid fluidized beds provided with structured packing as internals is examined, for solids denser than the liquid phase and within a wide range of operating conditions. A correlation to estimate the bed expansion in liquid-solid fluidized beds using structured packing as internals is developed. In addition, the feasibility of employing structured packing as internals for favoring classification of different density particles is demonstrated by analyzing the mass elutriated from the column at different liquid velocities for single particles or binary mixtures. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Registro:

Documento: Artículo
Título:Bed expansion and particle classification in liquid fluidized beds with structured internals
Autor:Piovano, S.; Salierno, G.L.; Montmany, E.; D'Agostino, M.; Maestri, M.; Cassanello, M.
Filiación:LARSI, Dep. Industrias, FCEyN, Universidad de Buenos Aires, Buenos Aires, Argentina
Palabras clave:Bed expansion; Liquid-solid fluidization; Particle classification; Structured packing; Binary mixtures; Expansion; Fluidization; Liquids; Bed expansion; Different densities; Liquid-fluidized beds; Liquid-solid fluidization; Liquid-solid fluidized beds; Operating condition; Particle classification; Structured packings; Fluidized beds
Año:2015
Volumen:38
Número:3
Página de inicio:423
Página de fin:430
DOI: http://dx.doi.org/10.1002/ceat.201400463
Título revista:Chemical Engineering and Technology
Título revista abreviado:Chem. Eng. Technol.
ISSN:09307516
CODEN:CETEE
Registro:https://bibliotecadigital.exactas.uba.ar/collection/paper/document/paper_09307516_v38_n3_p423_Piovano

Referencias:

  • Epstein, N., (2003) Handbook of Fluidization and Fluid-Particle Systems, , (Ed: W.-C. Yang), Marcel Dekker, New York
  • Epstein, N., (2005) Powder Technol., 151 (1-3), pp. 2-14
  • Di Felice, R., (2007) Chin. Particuol., 5 (5), pp. 312-320
  • Di Felice, R., (2010) Basin Res., 22 (4), pp. 591-602
  • Chowdhury, N., Zhu, J., Nakhla, G., Patel, A., Islam, M., (2009) Chem. Eng. Technol., 32 (3), pp. 364-372
  • Tatemoto, Y., Michikoshi, T., Higashino, T., Maeda, S., Maeda, S., Bando, Y., (2012) Chem. Eng. Technol., 35 (10), pp. 1-8
  • Atta, A., Razzak, S.A., Nigam, K.D.P., Zhu, J.-X., (2009) Ind. Eng. Chem. Res., 48 (17), pp. 7876-7892
  • Anspach, F.B., Curbelo, D., Hartmann, R., Garke, G., Deckwer, W.-D., (1999) J. Chromatogr. A, 865 (1-2), pp. 129-144
  • Hicketier, M., Buchholz, K., (2002) J. Biotechnol., 93 (3), pp. 253-268
  • Li, X.Z., Hauer, B., Rosche, B., (2013) J. Microbiol. Biotechnol., 23 (2), pp. 195-204
  • Metzdorf, C., Fuquex, P.-F., Flaschel, E., Renken, A., (1985) Conserv. Recycl., 8 (1-2), pp. 165-171
  • Rosche, B., Li, X.Z., Hauer, B., Schmid, A., Buehler, K., (2009) Trends Biotechnol., 27 (11), pp. 636-643
  • Cavatorta, O.N., Chiappori, A., Böhm, U., (1999) AIChE J., 45 (5), pp. 938-948
  • Cavatorta, O.N., Böhm, U., (2000) Chem. Eng. Technol., 23 (11), pp. 1021-1026
  • Di Felice, R., (1995) Chem. Eng. Sci., 50 (8), pp. 1213-1245
  • Metzdorf, C., Fauquex, P., Flaschel, E., Renken, A., (1985) German Chem. Eng., 8 (6), pp. 358-361
  • Metzdorf, C., Singh, P.C., Flaschel, E., Renken, A., (1991) Chem. Eng. Commun., 106, pp. 43-55
  • Nguyentranlam, G., Galvin, K.P., (2001) Miner. Eng., 14 (9), pp. 1081-1091
  • Galvin, K.P., Nguyentranlam, G., (2002) Chem. Eng. Sci., 57 (7), pp. 1231-1234
  • Duris, M., Garic-Grulovic, R., Arsenijevic, Z., Jaćimovski, D., Grbavcic, Z., (2013) Powder Technol., 235, pp. 173-179
  • Mukherjee, A.K., Gurulaxmi, S.N., (2013) Miner. Process. Extr. Metall. Rev., 34, pp. 130-138
  • Tatemoto, Y., Ishii, A., Suzuki, Y., Higashino, T., (2010) Chem. Eng. Technol., 33 (7), pp. 1169-1176
  • Tatemoto, Y., Higashino, T., Suzuki, Y., Michikoshi, T., Maeda, S., Bando, Y., (2011) Chem. Eng. Technol., 34 (6), pp. 877-885
  • Sarkar, B., Das, A., Mehrotra, S.P., (2008) Int. J. Miner. Process., 86, pp. 40-49
  • Mukherjee, A.K., Mishra, B.K., Kumar, R.V., (2009) Int. J. Miner. Process., 92, pp. 67-73
  • Galvin, K.P., Zhou, J., Walton, K., (2009) Chem. Eng. Sci., 64 (9), pp. 2003-2010
  • Galvin, K.P., Walton, K., Zhou, J., (2010) Miner. Eng., 23 (4), pp. 326-338
  • Galvin, K.P., Zhou, J., Dickinson, J.E., Ramadhani, H., (2012) Miner. Eng., 39, pp. 9-18
  • Nguyentranlam, G., Galvin, K.P., (2004) Int. J. Miner. Process., 73 (2-4), pp. 83-89
  • Doroodchi, E., Fletcher, D.F., Galvin, K.P., (2004) Chem. Eng. Sci., 59 (17), pp. 3559-3567
  • Doroodchi, E., Zhou, J., Fletcher, D.F., Galvin, K.P., (2006) Miner. Eng., 19 (2), pp. 162-171
  • Laskovski, D., Duncan, P., Stevenson, P., Zhou, J., Galvin, K.P., (2006) Chem. Eng. Sci., 61 (22), pp. 7269-7278
  • Wen, C.Y., Yu, Y.H., (1966) Chem. Eng. Prog. Symp. Ser., 62, pp. 100-111
  • Richardson, J.F., Zaki, W.N., (1954) Trans. Inst. Chem. Eng., 32, pp. 35-53
  • Martin, H., (1980) Chem. Ing. Tech., 52, pp. 199-209
  • Delgado, P., (2005) Eng. Thesis, , Universidad de Buenos Aires, Argentina
  • D'Agostino, M., (2010) Eng. Thesis, , Universidad de Buenos Aires, Argentina
  • Hagemeier, T., Glöckner, H., Roloff, C., Thévenin, D., Tomas, J., (2014) Chem. Eng. Technol., 37 (5), pp. 879-887
  • Forciniti, D., (2008) Industrial Bioseparations: Principles and Practice, , 1st ed., Wiley-Blackwell, Oxford

Citas:

---------- APA ----------
Piovano, S., Salierno, G.L., Montmany, E., D'Agostino, M., Maestri, M. & Cassanello, M. (2015) . Bed expansion and particle classification in liquid fluidized beds with structured internals. Chemical Engineering and Technology, 38(3), 423-430.
http://dx.doi.org/10.1002/ceat.201400463
---------- CHICAGO ----------
Piovano, S., Salierno, G.L., Montmany, E., D'Agostino, M., Maestri, M., Cassanello, M. "Bed expansion and particle classification in liquid fluidized beds with structured internals" . Chemical Engineering and Technology 38, no. 3 (2015) : 423-430.
http://dx.doi.org/10.1002/ceat.201400463
---------- MLA ----------
Piovano, S., Salierno, G.L., Montmany, E., D'Agostino, M., Maestri, M., Cassanello, M. "Bed expansion and particle classification in liquid fluidized beds with structured internals" . Chemical Engineering and Technology, vol. 38, no. 3, 2015, pp. 423-430.
http://dx.doi.org/10.1002/ceat.201400463
---------- VANCOUVER ----------
Piovano, S., Salierno, G.L., Montmany, E., D'Agostino, M., Maestri, M., Cassanello, M. Bed expansion and particle classification in liquid fluidized beds with structured internals. Chem. Eng. Technol. 2015;38(3):423-430.
http://dx.doi.org/10.1002/ceat.201400463