Publication: Rezin simanların güncel estetik restoratif cadcam materyallerinin rengi üzerine etkisi
Loading...
Date
2017
Authors
Authors
GÜRDAL, Işıl
Journal Title
Journal ISSN
Volume Title
Publisher
Bezmialem Vakıf University
Metrics
Abstract
The purpose of this study is to investigate the influence of resin cements on the color of recent CAD/CAM materials used for the production of laminate veneers. 7 different kinds of CAD/CAM materials of A2 HT shade were cut into 0,5 and 1 mm thick samples. The samples were cemented with A2 shaded dual-cure, light-cure resin cements and heated composite. The first color measurement were made via spectrophotometer. The specimens were subjected to thermal cycling (5500 cycles) and then second measurements were made. ∆E values were calculated using ∆E formula and the data were uploaded to SPSS software for statistical analysis. According to the results, highest ∆E values were obtained from leucite ceramics while lowest ∆E values were obtained from zirconia reinforced lithium silicate ceramics, resin nanoceramics and hybrid ceramics. Comparing the luting agents, heated composite showed the highest ∆E values while dual-cure resin cements obtained the lowest values. Also it was concluded that restoration material and luting agent significantly affected the ∆E values while thickness showed no significant effect on ∆E.
{{abstract}}
{{abstract}}
Description
Thesis (dentistry)--Bezmialem Vakıf University, Faculty of Dentistry, Department of Prosthodontics, Istanbul, 2017
Keywords
Diş Hekimliği = Dentistry, CAD/CAM, Resin cements, Thermal cycling, Protetik Diş Tedavisi Anabilim Dalı, Department of Prosthodontics