NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Deterministic Multiaxial Creep and Creep Rupture Enhancements for CARES/Creep Integrated Design CodeHigh temperature and long duration applications of monolithic ceramics can place their failure mode in the creep rupture regime. A previous model advanced by the authors described a methodology by which the creep rupture life of a loaded component can be predicted. That model was based on the life fraction damage accumulation rule in association with the modified Monkman-Grant creep rupture criterion. However, that model did not take into account the deteriorating state of the material due to creep damage (e.g., cavitation) as time elapsed. In addition, the material creep parameters used in that life prediction methodology, were based on uniaxial creep curves displaying primary and secondary creep behavior, with no tertiary regime. The objective of this paper is to present a creep life prediction methodology based on a modified form of the Kachanov-Rabotnov continuum damage mechanics (CDM) theory. In this theory, the uniaxial creep rate is described in terms of sum, temperature, time, and the current state of material damage. This scalar damage state parameter is basically an abstract measure of the current state of material damage due to creep deformation. The damage rate is assumed to vary with stress, temperature, time, and the current state of damage itself. Multiaxial creep and creep rupture formulations of the CDM approach are presented in this paper. Parameter estimation methodologies based on nonlinear regression analysis are also described for both, isothermal constant stress states and anisothermal variable stress conditions This creep life prediction methodology was preliminarily added to the integrated design code CARES/Creep (Ceramics Analysis and Reliability Evaluation of Structures/Creep), which is a postprocessor program to commercially available finite element analysis (FEA) packages. Two examples, showing comparisons between experimental and predicted creep lives of ceramic specimens, are used to demonstrate the viability of Ns methodology and the CARES/Creep program.
Document ID
19980228107
Acquisition Source
Legacy CDMS
Document Type
Other
Authors
Jadaan, Osama M.
(Wisconsin Univ. Platteville, WI United States)
Date Acquired
September 6, 2013
Publication Date
June 1, 1998
Subject Category
Structural Mechanics
Funding Number(s)
CONTRACT_GRANT: NAG3-1968
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available