Transition from Ignition to Flame Growth under External Radiation in 3D

Kashiwagi, Takashi; Nakamura, Yuji; Mell, William E.; Olson, Sandra L.

This study focuses on localized ignition by external radiant flux and subsequent flame growth over thin polymeric materials (plastic and paper) in microgravity. Two transition stages were observed. The first transition stage covers the period from the onset of ignition to the formation of stabilized flame near the ignited area. This is followed by the second transition of the flame growth stage from the initial stabilized flame to sustained fire growth away from the ignited area. For the first stage, ignition experiments of thin PMMA sheets were conducted using a CO2 laser as an external source in the 10 s drop tower. The results of front side surface ignition and of backside surface ignition were observed. The effects of imposed flow velocity, sample thickness, and ambient oxygen concentration on ignition are obtained. Numerical study was conducted to investigate to understand and predict ignition behavior observed in the experiments. For the second stage, numerical study is being conducted to describe the effects of gravity on heat release rate of a PMMA sheet. The gravity level was varied from zero to normal gravity. The preliminary results show that the maximum heat release occurs at around 0.02 g.

Document ID

20040161260

Acquisition Source

Glenn Research Center

Document Type

Conference Paper

Authors

Date Acquired

September 7, 2013

Publication Date

August 1, 2004

Publication Information

Publication: Strategic Research to Enable NASA's Exploration Missions Conference and Workshop: Poster Session, Volume 2

Subject Category

Funding Number(s)

Distribution Limits

Public

Work of the US Gov. Public Use Permitted.

Available Downloads

Name

Type

20040161260.pdf

STI

No Preview Available

NTRS

NTRS - NASA Technical Reports Server

Available Downloads

Related Records