NASA Logo

NTRS

NTRS - NASA Technical Reports Server

Back to Results
Creating the Deep Space Environment for Testing the James Webb Space Telescope at NASA Johnson Space Center's Chamber AChamber A is the largest thermal vacuum chamber at the Johnson Space Center and is one of the largest space environment chambers in the world. The chamber is 19.8 m (65 ft.) in diameter and 36.6 m (120 ft.) tall and is equipped with cryogenic liquid nitrogen panels (shrouds) and gaseous helium shrouds to create a simulated space environment. It was originally designed and built in the mid 1960 s to test the Apollo Command and Service Module and several manned tests were conducted on that spacecraft, contributing to the success of the program. The chamber has been used since that time to test spacecraft active thermal control systems, Shuttle DTO, DOD, and ESA hardware in simulated Low Earth Orbit (LEO) conditions. NASA is now moving from LEO towards exploration of locations with environments approaching those of deep space. Therefore, Chamber A has undergone major modifications to enable it to simulate these deeper space environments. Environmental requirements were driven, and modifications were funded by the James Webb Space Telescope program, and this telescope, which will orbit Solar/Earth L2, will be the first test article to benefit from the chamber s new capabilities. To accommodate JWST, the Chamber A high vacuum system has been modernized, additional LN2 shrouds have been installed, the liquid nitrogen system has been modified to minimize dependency on electrical power and increase its reliability, a new helium shroud/refrigeration system has been installed to create a colder more stable and uniform heat sink, and the controls have been updated to increase the level of automation and improve operator interfaces. Testing of these major modifications was conducted in August of 2012 and this initial test was very successful, with all major systems exceeding their performance requirements. This paper will outline the changes in overall environmental requirements, discuss the technical design data that was used in the decisions leading to the extensive modifications, and describe the new capabilities of the chamber.
Document ID
20130014030
Acquisition Source
Johnson Space Center
Document Type
Conference Paper
Authors
Homan, Jonathan L.
(NASA Johnson Space Center Houston, TX, United States)
Cerimele, Mary P.
(NASA Johnson Space Center Houston, TX, United States)
Montz, Michael E.
(NASA Johnson Space Center Houston, TX, United States)
Bachtel, Russell
(NASA Johnson Space Center Houston, TX, United States)
Speed, John
(NASA Johnson Space Center Houston, TX, United States)
O'Rear, Patrick
(NASA Johnson Space Center Houston, TX, United States)
Date Acquired
August 27, 2013
Publication Date
July 14, 2013
Subject Category
Astronomy
Report/Patent Number
JSC-CN-28890
Meeting Information
Meeting: AIAA 43rd International Conference on Environmental Systems
Location: Vail, CO
Country: United States
Start Date: July 14, 2013
End Date: July 18, 2013
Sponsors: American Inst. of Aeronautics and Astronautics
Distribution Limits
Public
Copyright
Work of the US Gov. Public Use Permitted.
No Preview Available