Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers

Jimenez-Mena, Norberto [UCL] Jacques, Pascal [UCL] Ding, Lipeng [UCL] Gauquelin, Nicolas [University of Antwerp] Schryvers, Dominique [University of Antwerp] Idrissi, Hosni [UCL] Delannay, Francis [UCL] Simar, Aude [UCL]

The toughness of Al-to-steel welds decreases with increasing thickness of the intermetallic (IM) layer formed at the interface. Co plating has been added as interlayer in Al-to-steel Friction Melt Bonded (FMB) welds to control the nature and thickness of the IM layer. In comparison to a weld without interlayer, Co plating brings about a reduction of the thickness of the IM layer by 70%. The critical energy release rate of the crack propagating in the weld is used as an indicator of toughness. It is evaluated via an adapted crack propagation test using an energy conservation criterion. For a weld without interlayer, critical energy release rate is found to increase when the thickness of the intermetallic layer decreases. When the intermetallic layer is thick, the crack propagates in a brittle manner through the intermetallic whereas, at low layer thickness, the crack deviates and partially propagates through the Al plate, which causes an increase of toughness. The use of a Co interlayer brings about an increase of toughness by causing full deviation of the crack towards the Al plate.