Accès à distance ? S'identifier sur le proxy UCLouvain
Surface modification of Ti6Al4V open porous structures produced by additive manufacturing
Primary tabs
Document type | Article de périodique (Journal article) |
---|---|
Access type | Accès interdit |
Publication date | 2012 |
Language | Anglais |
Journal information | "Advanced Engineering Materials" - Vol. 14, no.6, p. 363-370 (2012) |
Peer reviewed | yes |
Publisher | Wiley-VCH |
issn | 1438-1656 |
e-issn | 1527-2648 |
Publication status | Publié |
Affiliations |
KUL KUL KUL KUL |
Links |
- Youssef S., Maire E., Gaertner R., Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, 10.1016/j.actamat.2004.10.024
- Hollister Scott J., Porous scaffold design for tissue engineering, 10.1038/nmat1421
- Simske S.J., Ayers R.A., Bateman T.A., Porous Materials for Bone Engineering, 10.4028/www.scientific.net/msf.250.151
- Yasa E., Kruth J.-P., Deckers J., Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting, 10.1016/j.cirp.2011.03.063
- Kempen K., Yasa E., Thijs L., Kruth J.-P., Van Humbeeck J., Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel, 10.1016/j.phpro.2011.03.033
- Van Bael S., Kerckhofs G., Moesen M., Pyka G., Schrooten J., Kruth J.P., Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures, 10.1016/j.msea.2011.06.045
- Kruth J.-P., Levy G., Klocke F., Childs T.H.C., Consolidation phenomena in laser and powder-bed based layered manufacturing, 10.1016/j.cirp.2007.10.004
- Li Xiang, Wang Chengtao, Zhang Wenguang, Li Yuanchao, Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process, 10.1016/j.matlet.2008.10.065
- Murr L.E., Amato K.N., Li S.J., Tian Y.X., Cheng X.Y., Gaytan S.M., Martinez E., Shindo P.W., Medina F., Wicker R.B., Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting, 10.1016/j.jmbbm.2011.05.010
- Woodfield T.B.F., Malda J., de Wijn J., Péters F., Riesle J., van Blitterswijk C.A., Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique, 10.1016/j.biomaterials.2003.10.056
- Zhang L.C., Klemm D., Eckert J., Hao Y.L., Sercombe T.B., Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy, 10.1016/j.scriptamat.2011.03.024
- Pyka, European Conference for Non-Destructive Testing (ECNDT) (2010)
- LIU X, CHU P, DING C, Surface modification of titanium, titanium alloys, and related materials for biomedical applications, 10.1016/j.mser.2004.11.001
- Bloyce, ASM Handbook, 5 (1994)
- Nawrat, Przemysł Chemiczny, 82, 851 (2003)
- Kuhn Anselm, The electropolishing of titanium and its alloys, 10.1016/s0026-0576(04)82510-8
- Percival Donald B., Walden Andrew T., Spectral Analysis for Physical Applications : Multitaper and Conventional Univariate Techniques, ISBN:9780511622762, 10.1017/cbo9780511622762
- Kerckhofs G., Schrooten J., Van Cleynenbreugel T., Lomov S. V., Wevers M., Validation of x-ray microfocus computed tomography as an imaging tool for porous structures, 10.1063/1.2838584
Bibliographic reference | Pyka, Grzegorz ; Burakowski, Andrzej ; Kerckhofs, Greet ; Moesen, Maarten ; Van Bael, Simon ; et. al. Surface modification of Ti6Al4V open porous structures produced by additive manufacturing. In: Advanced Engineering Materials, Vol. 14, no.6, p. 363-370 (2012) |
---|---|
Permanent URL | http://hdl.handle.net/2078/194590 |