Design a vectorial propulsion system for Guanay II AUV
Visualitza/Obre
10.1109/OCEANSE.2017.8084953
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/116618
Tipus de documentComunicació de congrés
Data publicació2017
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The autonomous underwater vehicle(AUV) Guanay II
was designed to navigate on the surface of the sea, and to realize a
vertical immersion in specific points. This vehicle has three thrusters
located on stern, oriented to provide propulsion and yaw control on
the horizontal plane. On the other hand, the immersion system used
in the Guanay II is based in the change of the buoyancy of the
vehicle, by using a piston system. Therefore, the vehicle does not
have the ability to navigate in immersion, due to its design, which the
inclination of the vehicle (pitch angle) cannot be controlled. In this
work, we show the design a vector propulsion system for the vehicle
Guanay II, which will allow to control the pitch of the AUV in
immersion. For this purpose, we have provided to the two laterals
thruster the possibility of varying their propulsion angle on the
vertical plane, using two servomotors. Next, we will show the design
and the results obtained.
CitacióGalarza, C.M., Masmitja, I., Prat, J., Gomariz, S. Design a vectorial propulsion system for Guanay II AUV. A: OCEANS IEEE/MTS. "OCEANS 2017 - Aberdeen: 19-22 June 2017". Institute of Electrical and Electronics Engineers (IEEE), 2017, p. 1-7.
ISBN978-1-5090-5278-3
Versió de l'editorieeexplore.ieee.org
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
oceans2017-vectorial_extendido_ingles.pdf | Article pricipal | 1,394Mb | Visualitza/Obre |