Boron/nitrogen flame retardant additives cross-linked cellulose nanofibril/montmorillonite aerogels towards super low flammability and improved mechanical properties
Cita com:
hdl:2117/143187
Tipus de documentArticle
Data publicació2019-04-07
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Low-flammability freeze-dried cellulose nanofibril (CNF)/sodium montmorillonite (MMT) aerogels with improved mechanical properties were fabricated via a facile cross-linking of boric acid (BA) and melamine-formaldehyde (MF) resins. Scanning electron microscopy analysis showed that BA cross-linking reduced the interspacing of layered CNF/MMT aerogels whereas introduction of MF formed polymeric fibrils that connected the layers. These changes on microstructures resulted in the improvement on compressive mechanical properties of the cross-linked aerogels. Moreover, the boron (B)/nitrogen (N) containing flame retardant cross-linkers greatly increased the limiting oxygen index values that could reach 85% and leveled the UL-94 rating from no rating to V-0. Cone calorimetric results suggested that BA and MF induced a synergistic effect on the flame retardant properties of the CNF/MMT aerogels. However, the thermal conductivity was little affected because pore structure and size was not substantially modified. This simple approach fabricated highly flame-resistant and mechanically strong CNF-based aerogels that could be used in various engineering fields
CitacióWang, L. [et al.]. Boron/nitrogen flame retardant additives cross-linked cellulose nanofibril/montmorillonite aerogels towards super low flammability and improved mechanical properties. "Polymers for advanced technologies", 7 Abril 2019, vol. 30, núm. 7, p. 1807-1817.
ISSN1042-7147
Versió de l'editorhttps://onlinelibrary.wiley.com/doi/abs/10.1002/pat.4613
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
wang, L. Boron_ ... tardant additives .....pdf | 1,636Mb | Visualitza/Obre |