Assessment of cracking resistance of bituminous mixtures by means of Fenix test
Visualitza/Obre
Assessment of cracking resistance by means of FENIX test.pdf (568,0Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Tipus de documentText en actes de congrés
Data publicació2012
EditorSpringer
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper shows the application of a new direct tensile test developed at the Road
Research Laboratory of the Department of Transport and Regional Planning of the Technical University of Catalonia. The test is called Fénix test and is aimed at the
assessment of cracking resistance of different types of bituminous mixtures at different temperatures. Fénix test calculates the dissipated energy during the cracking process of the material and the softening phase in the load-displacement curve of the test. The test procedure consists of subjecting one half of a 63.5 mm thick cylindrical specimen of a 101.6 mm diameter prepared by Marshall or gyratory compaction to a tensile stress at a constant displacement velocity (1 mm/min) and specific temperature. A 6 mm-deep notch is made in the middle of its flat side where two steel plates are fixed. The specimen is glued to the steel plates with a thixotropic adhesive mortar containing epoxy resins. Both plates are attached to a loading platen so that they can rotate about fixing points. Different types of mixtures with different stiffness moduli, including very flexible mixtures like gap-graded and SMA mixes, as well as stiffer mixtures like high modulus mixtures, were tested. The results were compared with those obtained for the same mixtures from standard fatigue bending beam tests.
CitacióMiró, R. [et al.]. Assessment of cracking resistance of bituminous mixtures by means of Fenix test. A: RILEM International Conference on Cracking in Pavements. "7th RILEM International conference on cracking in pavement: mechanisms, modeling, testing, detection and prevention case histories". Delft: Springer, 2012, p. 1-11.
ISBN978-94-007-4565-0
Col·leccions
- Departament d'Infraestructura del Transport i del Territori - Ponències/Comunicacions de congressos [123]
- Departament d'Infraestructura del Transport i el Territori (fins octubre 2015) - Ponències/Comunicacions de congressos [126]
- MATCAR - Materials de construcció i carreteres - Ponències/Comunicacions de congressos [120]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Assessment of c ... by means of FENIX test.pdf | 568,0Kb | Accés restringit |