Design and manufacture of a customised temporomandibular prosthesis
Visualitza/Obre
10.23967/j.rimni.2019.02.001
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/165209
Tipus de documentArticle
Data publicació2019
EditorUniversitat Politècnica de Catalunya. CIMNE
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-CompartirIgual 3.0 Genèrica
Abstract
In this work, design, manufacture and surgical success of a personalised temporomandibular prosthesis is featured. A fused deposition modelling technique and Die forging process constitute the methodology used in a patient who had an amputation in the upper third branch of the mandible, without considering the joint capsule. The implant was designed using a processed resection image of a computational tomography and using the methodology of Özkaya and Nordin. The jaw operating conditions were simulated by the finite element method (FEM). The main considered factors were the morphological geometry of the patient, implant fixation in the first third of the branch, implant fixation on
the chin, dental post for placement of the teeth, and the form of the sub-lingual fossa weight optimisation. Special consideration was to preserve the patients facial aesthetics.
CitacióTorres-San-Miguel, C.R. [et al.]. Design and manufacture of a customised temporomandibular prosthesis. "Revista internacional de métodos numéricos para cálculo y diseño en ingeniería", 2019, vol. 35, núm. 1.
ISSN0213-1315
1886-158X
1886-158X
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
RIMNI350106.pdf | 6,659Mb | Visualitza/Obre |