Improving QoT estimation accuracy with DGE monitoring using machine learning
Visualitza/Obre
Final_ONDM_2020-ONFIRE_Camera_Ready.pdf (1,080Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/191922
Tipus de documentText en actes de congrés
Data publicació2020
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
ProjecteONFIRE - Future Optical Networks for Innovation, Research and Experimentation (EC-H2020-765275)
Abstract
In optical transport networks, Dynamic Gain Equalizers (DGE) are typically used at each link. A DGE
selectively attenuates the channels to compensate the cumulative Erbium Doped Fiber Amplifier (EDFA) gain ripple effect on the multi-span link, resulting in almost flat output power at the end of the link. We leverage monitored per link DGE attenuation profiles and coherent receivers Signal to Noise Ratio (SNR) information, and propose a machine learning (ML) based scheme to estimate the EDFA gain ripple penalties for new connections. Using that in realistic simulation scenarios we observed a design margin reduction from ~1dB to ~0.3dBs.
CitacióMahajan, A. [et al.]. Improving QoT estimation accuracy with DGE monitoring using machine learning. A: International Conference on Optical Network Design and Modeling. "2020 International Conference on Optical Network Design and Modeling (ONDM) took place 18-21 May 2020 in Castelldefels, Spain". Institute of Electrical and Electronics Engineers (IEEE), 2020, p. 1-6.
ISBN978-3-903176-22-5
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Final_ONDM_2020-ONFIRE_Camera_Ready.pdf | 1,080Mb | Accés restringit |