Numerical and experimental procedure for material calibration using the serial/parallel mixing theory, to analyze different composite failure modes
Visualitza/Obre
10.1080/15376494.2019.1675106
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/366071
Tipus de documentArticle
Data publicació2019-01-01
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 4.0 Internacional
Abstract
This work proposes a calibration procedure to obtain the material parameters required by the Serial/Parallel Mixing Theory for the analysis of composites. A set of experimental tests are defined to obtain the main composite failure modes. Then, it is proposed to calculate the parameters required by the formulation using the experimental results. The procedure proposed is validated by comparing the numerical results, with those obtained from the experimental campaign. This comparison shows that the Serial/Parallel mixing theory is capable of representing the failure modes of the composite for different loading scenarios as well as the material toughness.
CitacióJurado, J. [et al.]. Numerical and experimental procedure for material calibration using the serial/parallel mixing theory, to analyze different composite failure modes. "Mechanics of advanced materials and structures (Online)", 1 Gener 2019, vol. 28, núm. 14, p. 1415-1433.
ISSN1537-6532
Versió de l'editorhttps://www.tandfonline.com/doi/full/10.1080/15376494.2019.1675106
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
2019 - Jurado - Martinez - et al.pdf | 2,372Mb | Visualitza/Obre |