Two-Dimensional Communication of Networked Devices Through a Single Conductive Surface
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/7850
Tipus de documentText en actes de congrés
Data publicació2010-06-15
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper shows the possibility of two-dimensional
communication between electronic devices by using only one
conductive surface. An analysis of the expected magnitude of the
signal at the reception point as a function of distance and
electrical parameters of the conductive surface is presented.
Measurements on surfaces from 0.4 to 2.56 m2 and with sheet
resistances from 77 to 1462 ohm/square prove the correctness of
this analysis. In addition, practical rules to locate and orient the
transceivers are given. Prototype transceivers connected to a
plane with one conductive surface able to communicate at
100Kbit/s at a distance of 2m are described.
CitacióRius, J. Two-Dimensional Communication of Networked Devices Through a Single Conductive Surface. A: International Conference on Networked Sensing Systems. "INSS'10". Kassel: 2010, p. 115-122.
Dipòsit legalIEEE catalog number: CFP1046C-PRT
ISBN978-1-4244-7909-2
Col·leccions
- QINE - Disseny de Baix Consum, Test, Verificació i Tolerància a Fallades - Ponències/Comunicacions de congressos [60]
- QINE - Disseny de Baix Consum, Test, Verificació i Circuits Integrats de Seguretat - Ponències/Comunicacions de congressos [78]
- Departament d'Enginyeria Electrònica - Ponències/Comunicacions de congressos [1.713]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
INSS10_FORMATTED.pdf | article INSS10 | 524,0Kb | Visualitza/Obre |