Design of an on-board beam generation process for the forward link of a multibeam broadband satellite system
Visualitza/Obre
[3]_p2943-joroughi.pdf (751,7Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/86268
Tipus de documentText en actes de congrés
Data publicació2013
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The multi-beam broadband satellite systems have been deployed to provide broadband services to their under-served geo-graphical area. In one hand, with assuming full frequency reuse among beams the resulting interference requires either a pre- or post-cancellation
process. On other hand, by increasing the number of beams, the ground and space units must employ an extensive communication e ort on the feeder link (i.e. the link between gateway and satellite) to exchange all of the feed signals, yet maintaining a low processing responsibility to the payload. Since the feeder link spectral resources are scarce, it is
desirable to use an on-board beam generation process which leads to a signi cant feeder link bandwidth reduction. In this context, a hybrid space/ground processing (i.e. both the gateway and the satellite digitally process the transmitted/received data) shall be employed. This work presents a design of the corresponding on-board beam generation process and precoding in the forward link (i.e. from gateway to users in coverage area) of satellite system. In order to e ective limit inter-beam interference, this work also predicts a zero forcing precoding technique taking into account the per feed power constraint for practi-
cal issues. To this end, we formulate the precoding problem with considering individual on-board feed in order to e cient and more realistic use of payload power resources. This is done by considering the zero forcing and its relation to the theory of generalized inverse
in the linear algebra.
CitacióJoroughi, V., Devillers, B., Vazquez, M., Perez, A. Design of an on-board beam generation process for the forward link of a multibeam broadband satellite system. A: IEEE Global Communications Conference. "2013 IEEE Globecom Workshops (GC Wkshps) took place 9-13 December 2013 in Atlanta, GA, USA". Atlanta: Institute of Electrical and Electronics Engineers (IEEE), 2013, p. 2943-2948.
ISBN978-1-4779-2851-4
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
[3]_p2943-joroughi.pdf | 751,7Kb | Accés restringit |