Fertigstellung und Inbetriebnahme eines Versuchstands zur Vermessung experimenteller induktiver Batterieladesysteme
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/99821
Realitzat a/ambKarlsruher Institut für Technologie
Tipus de documentProjecte Final de Màster Oficial
Data2015
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Within the framework of inductive technology, this master’s thesis represents the conclusion of several previous projects that pursuit a common objective, to design and develop an inductive wireless power transfer system based in resonant converters.
Together with the research and development of the previous projects, this thesis describes the last tasks implemented in order to perform the construction and set up of a 44 kVA charger with an efficiency of 90%.
The grid power supply is modulated by means of a power inverter switching at frequencies up to 500 kHz. A method to recognise the ideal switching frequency has been designed and implemented. Two different coil systems have been tested, one with high coupling coefficient and another with good behaviour under deviation conditions. The track tuning consists of two capacitors modules, each connected in series with their respective induction coil. In all tests a DC resistor has been used as a system’s load.
TitulacióMÀSTER UNIVERSITARI EN ENGINYERIA INDUSTRIAL (Pla 2014)
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Humbert Vidal-F ... ner Batterieladesyst~1.pdf | Report | 8,959Mb | Visualitza/Obre |