Book/Dissertation / PhD Thesis FZJ-2018-06708

http://join2-wiki.gsi.de/foswiki/pub/Main/Artwork/join2_logo100x88.png
Microstructure and Thermomechanical Properties of SrTi$_{1-x}$Fe$_{x}$O$_{3-δ}$ Oxygen Transport Membranes and Supports



2019
Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag Jülich
ISBN: 978-3-95806-381-5

Jülich : Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag, Schriften des Forschungszentrums Jülich Reihe Energie & Umwelt / Energy & Environment 450, vi, 148 S. () = RWTH Aachen, Diss., 2018

Please use a persistent id in citations:  

Abstract: Pure oxygen is considered to be an important commodity and its demand is expected to rise in the upcoming years. Therefore, interest in a new, scalable technology for air separation based on oxygen transport membranes has increased. Indeed, ceramic oxygen transport membranes can possess remarkable advantages compared to existing state-of-the-art processes for oxygen production in small and medium scale. Typically, such membranes have to be operated at 800 - 900 °C and under high pressure gradients, which challenges significantly the chemical and mechanical stability of the respective brittle ceramics components. Thus, the current work concentrates on the mechanical properties of a promising perovskite material for mixed conducting oxygen transport membranes based on SrTi$_{1-x}$Fe$_{x}$O$_{3-\delta}$, (STF-X) with x = 0.25, 0.35 and 0.5. The dense membrane materials, synthesized through solid state reaction route and processed via tape casting, were characterized with respect to their mechanical behavior via depth-sensitive indentation testing and ring-on-ring flexural tests. No tradeoff between functional and mechanical properties is observed for the studied dense materials. Ring-on-ring tests conducted at different loading rates gave access to subcritical crack growth sensitivity and aided the prediction of the materials’ lifetime through stress-time-probability diagrams, where SrTi$_{0.65}$Fe$_{0.35}$O$_{3}$ revealed the best performance among the studied compositions. The mechanical properties of dense tape cast SrTi$_{0.75}$Fe$_{0.25}$O$_{3-\delta}$ were derived at 900°C with help of ring-on-ring flexural tests carried out at two distinct loading rates: 1 and 100 N/min. The apparent elastic modulus appeared to be time dependent. The average fracture stress estimated on the basis of the data was rather loading rate invariant and higher than the same property obtained at room temperature. Thus, it appears that SrTi$_{0.75}$Fe$_{0.25}$O$_{3-\delta}$ possesses an anelastic behavior that might be associated with oxygen release and/or primary creep deformation. In addition, porous SrTi$_{0.75}$Fe$_{0.25}$O$_{3-\delta}$ specimens, representative for use as porous substrate for supported asymmetric oxygen transport membranes, were produced through tape casting, freeze drying, and phase inversion casting. The first method yielded a random distributed porosity with spherical pores reaching a value of 32%. Freeze-drying and phase inversion, however, derived a channel-like porosity in the same level. Ring-on-ring bending tests were employed in order to derive elasticity and fracture stresses of the manufactured samples. In order [...]


Note: RWTH Aachen, Diss., 2018

Contributing Institute(s):
  1. Werkstoffstruktur und -eigenschaften (IEK-2)
Research Program(s):
  1. 111 - Efficient and Flexible Power Plants (POF3-111) (POF3-111)

Appears in the scientific report 2018
Database coverage:
Creative Commons Attribution CC BY 4.0 ; OpenAccess
Click to display QR Code for this record

The record appears in these collections:
Document types > Theses > Ph.D. Theses
Institute Collections > IEK > IEK-2
Document types > Books > Books
Workflow collections > Public records
Publications database
Open Access

 Record created 2018-11-23, last modified 2022-09-30