Influence of ground motion scaling methods on the computed seismically-induced sliding displacements of slopes

Evaluation of the seismic stability of slopes often involves an estimate of the expected sliding displacements. This evaluation requires a suite of acceleration-time histories as input motions. The methods of selecting and scaling these motions can affect the computed sliding displacements. Linear scaling of recorded ground motions and modification of recorded motions by spectral matching are common approaches used for ground motion selection and these approaches were used in this study to select motions for use in sliding displacement analyses. Rigid sliding block analyses and decoupled flexible sliding block analyses were performed using a suite of linearly scaled motions and a suite of spectrally matched motions. . Generally, the spectrally matched motions predict 10 to 30%, on average, smaller displacements and significantly less variability than the linearly scaled motions, when both suites of input motions were developed to match the same acceleration response spectrum. When both suites of input motions were developed to match the same peak ground velocity and acceleration response spectrum, the spectrally matched motions generally predict 5 to 15%, on average, larger displacements than the linearly scaled motions. Because ground motion parameters beyond acceleration response spectrum affect the computed sliding displacement, parameters such as peak ground acceleration (PGA), peak ground velocity (PGV) and mean period (T[subscript m]) should be considered in selecting and scaling motions for use in sliding displacement analyses.