S.L. Grassie and J. Kalousek, Rail corrugation: characteristics, causes and treatments, J. Rail Rapid Transit. 207 (1993), pp. 57-68.
E. Tassilly and N. Vincent, Rail corrugations: analytical model and field tests,Wear 144 (1991), pp. 163-178.
E. Tassilly and N. Vincent, A linear model for the corrugation of rails, J. Sound Vib. 150 (1991), pp. 25-45.
S.L. Grassie, Rail corrugation: advances in measurement, understanding and treatment, Wear 258 (2005), pp. 1224-1234.
Transit Cooperative Research Program. Report RRD-26 (Project D-01): Rail corrugation mitigation in transit, June 1998.
H. Chollet, Etude En Similitude Mécanique Des Efforts Tangents Au Contact Roue-Rail, Ph.D. thesis, Université Paris 6, 1991.
C.A. Brockley and P.L. Ko, An investigation of rail corrugation using friction-induced vibration theory, Wear 128 (1988), pp. 99-106.
W.F. Hayes and H.G. Tucker, Wheelset-track resonance as a possible source of corrugation wear, Wear 144 (1991), pp. 211-226.
A. Matsumoto, Y. Sato, M. Tanimoto, and Q. Kang, Study on the formation mechanism of rail corrugation on curved track, Vehicle Syst. Dyn. Suppl. 25 (1996), pp. 450-465.
A. Matsumoto, Y. Sato, O. Hiroyuki, M. Tanimoto, Y. Oka, and E. Miyauchi, Formation mechanism and countermeasures of rail corrugation on curved track,Wear 253 (2002), pp. 178-184.
S.L. Grassie and J.A. Elkins, Corrugation on North American transit lines,Vehicle Syst. Dyn. Suppl. 28 (1998), pp. 5-17.
B. Ripke and K. Hempelmann, Model prediction of track loads and rail corrugation, Railway Gazette (1994), pp. 447-450.
K. Hempelmann and K. Knothe, An extended linear model for the prediction of short pitch corrugation, Wear 191 (1996), pp. 161-169.
J.I. Egana, J. Vinolas, and M. Seco, Investigation of the influence of rail pad stiffness on rail corrugation on a transit system,Wear 261 (2006), pp. 216-224.
M. Tomeoka, N. Kabe, M. Tanimoto, E. Miyauchi, and M.Nakata, Friction control between wheel and rail by means of on-board lubrication,Wear 253 (2002), pp. 124-129.
D.T. Eadie, J. Kalousek, and K.C. Chiddick, The role of high positive friction (HPF) modifier in the control of short pitch corrugations and related phenomena,Wear 253 (2002), pp. 185-192.
A. Matsumoto,Y. Sato, H. Ohno, M. Tomeoka, K. Matsumoto, T. Ogino, M. Tanimoto,Y. Oka, and M. Okano, Improvement of bogie curving performance by using friction modifier to rail/wheel interface: Verification by full-scale rolling stand test,Wear 258 (2005), pp. 1201-1208.
Transit Cooperative Research Programme, Wheel and rail vibration absorber testing and demonstration, Tech. Rep. 67, 2001.
J. Maes and H. Sol, A double tuned rail damper-increased damping at the two first pinned-pinned frequencies, J. Sound Vibration 267 (2003), pp. 721-737.
J. Ormondroyd and J.P. Den Hartog, The theory of the damped vibration absorber, Trans. Am. Soc. Mech. Eng. 50 (1928), p. 7.
S. Timoshenko and D.H.Young, Advanced Dynamics. McGraw-Hill, NewYork, 1948.
Y.Z. Wang and S.H. Cheng, The optimal design of dynamic absorber in the time domain and the frequency domain, Appl. Acoust. 28 (1989), pp. 67-78.
J. Connor, Introduction to Structural Motion Control, Prentice Hall, NewYork, 1999.
PatentWO 2004/007217. Reduction of torsional vibration in rail vehicle wheel set.
K. Hempelmann, F. Hiss, and B. Ripke, The formation of wear patterns on rail tread, Wear 144 (1991), pp. 179-195.
J.J. Kalker, Rolling contact phenomena, in Rolling Contact Phenomena, B. Jacobs and J.J. Kalker, eds., NewYork, 2000.
H. Krause and G. Poll, Wear of wheel-rail surfaces,Wear 113 (1986), pp. 103-122.
A. Jaschinski, H. Chollet, S. Iwicki, A. Wickens, and J. Von Wurzen, The application of roller rigs to railway vehicle dynamics, Vehicle Syst. Dynam. 31 (1999), pp. 345-392.
J.J. Kalker, Survey of wheel-rail contact theory, Vehicle Syst. Dynam. 5 (1979), pp. 317-358.
A. Matsumoto,Y. Sato, M. Nakata, M. Tanimoto, and K. Qi, Wheel-rail contact mechanics at full scale on the test stand,Wear 191 (1996), pp. 101-106.