Open Collections

Effect of drag-reducing additives on pipe flow : Visualization with laser holographic interferometry

University of British Columbia

The effect of turbulence damping polymer additive on the fluid flow structure near the wall region of a circular pipe was made visible using real-time laser holographic interferometry. The interference fringes were recorded by high-speed motion photography. The gross flow behaviour of dilute solutions of Polyox WSR 301 in distilled water was studied in a 2.63 cm pipe. It was observed that (i) The onset of drag reduction occurred at a critical value of wall shear stress and Reynolds number. (ii) The fluid property parameter, δ, which governs the drag reduction capacity of the solution, had a power-law dependence on polymer concentration given by [23] [ Formula omitted ] Motion pictures of real-time holographic fringe displays for pure solvent and polymer solution were appraised qualitatively. Under similar flow conditions turbulent eddies in drag-reducing flow were observed (i) to show less small scale structure than those in the pure solvent, and (ii) to burst from the wall region into the bulk flow with a lower frequency.

Text

2011-04-05

For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

http://hdl.handle.net/2429/33284

Chemical and Biological Engineering

University of British Columbia

Graduate