ダウンロード数: 187
このアイテムのファイル:
| ファイル | 記述 | サイズ | フォーマット | |
|---|---|---|---|---|
| j.egypro.2011.09.064.pdf | 461.27 kB | Adobe PDF | 見る/開く |
| タイトル: | Design of Metal Wires-based Organic Photovoltaic Cells |
| 著者: | Chuangchote, Surawut Sagawa, Takashi    https://orcid.org/0000-0002-0908-0487 (unconfirmed)Yoshikawa, Susumu |
| 著者名の別形: | 佐川, 尚 吉川, 暹 |
| キーワード: | conducting polymer metal wire organic photovoltaic cell power conversion efficiency |
| 発行日: | 2011 |
| 出版者: | Elsevier Ltd. |
| 誌名: | Energy Procedia |
| 巻: | 9 |
| 開始ページ: | 553 |
| 終了ページ: | 558 |
| 抄録: | An organic photovoltaic architecture based on conducting polymer and organic compounds deposited concentrically on long metal wires were introduced and designed. The light enters to photovoltaic cells through a semitransparent outer electrode. Preliminary tests on the potential to realize the model in conventional flat devices was carried out. Insertion of a hole collecting layer, poly (ethylene dioxythiophene) doped with polystyrene sulfonic acid (PEDOT: PSS), to between the active layer and the outer electrode, and increasing in the wettability of PEDOT: PSS solutions on polymer-thin films were found to increase in power conversion efficiencies of photovoltaic cells. The power conversion efficiency of 0.11% was obtained from the devices tested, which is reasonably high enough for further development in metal wires-based organic photovoltaic cells. |
| 記述: | 9th Eco-Energy and Materials Science and Engineering Symposium, EMSES 2011 ; 25 May 2011 through 27 May 2011 ; Chiang Rai |
| 著作権等: | © 2011 Published by Elsevier Ltd. Open access under CC BY-NC-ND license. |
| URI: | http://hdl.handle.net/2433/235662 |
| DOI(出版社版): | 10.1016/j.egypro.2011.09.064 |
| 出現コレクション: | 学術雑誌掲載論文等 |
このリポジトリに保管されているアイテムはすべて著作権により保護されています。