References
Basu A, Mishra DA, Roychowdhury K (2013) Rock failure modes under uniaxial compression, Brazilian, and point load tests. Bull Eng Geol Environ 73(3):457–475
Brown DW, Duchane DV, Heiken G et al (2012) Mining the earth’s heat: hot dry rock geothermal energy. Springer, Berlin
Burton E, Friedmann J, Upadhye R (2006) Best practices in underground coal gasification. Lawrence Livermore National Laboratory, Livermore
Chen YL, Shao W, Zhou YC (2012) Experimental study on the influence of temperature on the mechanical properties of granite under uni-axial compression and fatigue loading. Int J Rock Mech Min Sci 56:62–66
Ding Qh, Ju F, Mao XB et al (2016) Experimental investigation of the mechanical behavior in unloading conditions of sandstone after high-temperature treatment. Rock Mech Rock Eng 49(7):2641–2653
Dwivedi RD, Goel RK, Prasad VVR, Sinha A (2008) Thermo-mechanical properties of India and other granites. Int J Rock Mech Min Sci 45:303–315
Gelet R, Loret B, Khalili N (2012) A thermo-hydro-mechanical coupled model in local thermal non-equilibrium for fractured HDR reservoir with double porosity. J Geophys Res 117(B7):1–23
Goodman RE (1980) Introduction to rock mechanics. Wiley, New York
Homand-etienne F, Houpert R (1989) Thermally induced microcracking in granites: characterization and analysis. Int J Rock Mech Min Sci Geomech Abstr 26(2):125–134
Jaeger JC, Cook NGW, Zimmerman RW (2007) Fundamentals of rock mechanics, 4th edn. Blackwell Publishing, Hoboken
Kong B, Wang EY, Li ZH et al (2016) Fracture mechanical behavior of sandstones subjected to high-temperature treatment and its acoustic emission characteristics under uniaxial compression conditions. Rock Mech Rock Eng 49(12):4911–4918
Liu S, Xu JY (2014) Mechanical properties of Qinling biotite granite after high temperature treatment. Int J Rock Mech Min Sci 71:188–193
Liu S, Xu JY (2015) An experimental study on the physic-mechanical properties of two post-high-temperature rocks. Eng Geol 185:63–70
Maji VB (2011) Understanding failure mode in uniaxial and triaxial compression for a hard brittle rock. In: Zhou YX (ed) Harmonising rock engineering and the environment. Taylor & Francis Group, London, pp 336–337
Otto C, Kempka T (2015) Thermo-mechanical simulations confirm: temperature-dependent mudrock properties and nice to have in far-field environmental assessments of underground coal gasification. Energy Procedia 76:582–591
Peng J, Rong G, Cai M et al (2016) Physical and mechanical behaviors of a thermal-damaged coarse marble under uniaxial compression. Eng Geol 200:88–93
Ranjith PG, Viete DR, Chen BJ et al (2012) Transformation plasticity and the effect of temperature on the mechanical behaviour of Hawkersbury sandstone at atmospheric pressure. Eng Geol 151:120–127
Sellin P, Leupin OX (2013) The use of clay as an engineered barrier in radioactive-waste management—a review. Clay Clay Miner 61(6):477–498
Shao SS, Ranjith PG, Wasantha PLP et al (2015) Experimental and numerical studies on the mechanical behaviour of Australian Strathbogie granite at high temperatures: an approach to geothermal energy. Goethermics 54:96–108
Singh B, Ranjith PG, Chandrasekharam D et al (2015) Thermo-mechanical properties of Bundelkhand granite near Jhansi, India. Geomech Geophy Geo-Energy Geo-Res 1(1):35–53
Tian H, Ziegler M, Kempka T (2014) Physical and mechanical behavior of claystone exposed to temperatures up to 1000°C. Int J of Rock Mech Min Sci 70:144–153
Tian H, Kempka T, Xu S et al (2016) Mechanical properties of sandstones exposed to high temperature. Rock Mech Rock Eng 49:321–327
Tullis J, Yund RA (1987) Transition from cataclastic flow to dislocation creep of feldspar: mechanisms and microstructures. Geology 15(7):606–609
Verma AK, Gautam P, Singh TN et al (2015) Discrete element modeling of conceptual deep geological repository for high-level nuclear waste disposal. Arab J Geosci 8:8027–8038
Xu XL, Kang ZX, Ji M et al (2009) Research of microcosmic mechanism of brittle-plastic transition for granite under high temperature. Procedia Earth Planet Sci 1(1):432–437
Yang SQ, Ranjith PG, Jing HW et al (2017) An experimental investigation on thermal damage and failure mechanical behavior of granite after exposure to different high temperature treatments. Geothermics 65:180–197
Yin TB, Shu RH, Li XB et al (2016) Comparison of mechanical properties in high temperature and thermal treatment granite. Trans Nonferr Met Soc China 26:1926–1937
Acknowledgements
The work is jointly supported by the National Natural Science Foundation of China (Nos. 51541405, 41602374, and 11602235).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tian, H., Mei, G., Jiang, GS. et al. High-Temperature Influence on Mechanical Properties of Diorite. Rock Mech Rock Eng 50, 1661–1666 (2017). https://doi.org/10.1007/s00603-017-1185-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-017-1185-3